Preámbulo 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC ( 1 ) , and in particular Article 5c, first paragraph, point (a), thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Annex V to Commission Implementing Regulation (EU) 2022/1362 ( 2 ) in point 3.2., Table 2 and Table 3 contains certain errors. A requirement was missing and the reference ranges referred to the absolute C D values. Those errors concern the procedure for the computational fluid dynamics simulation used for the certification of aerodynamic devices.
recital 2recital 2
(2) Implementing Regulation (EU) 2022/1362 should therefore be corrected to ensure that the aerodynamic devices are certified in the same way and applied equally by all manufacturers.
recital 3recital 3
(3) This Regulation should thus apply as from the date of entry into force of Implementing Regulation (EU) 2022/1362, and it should enter into force immediately.
recital 4recital 4
(4) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee – Motor Vehicles (TCMV) referred to in Article 83 of Regulation (EU) 2018/858 of the European Parliament and of the Council ( 3 ) ,
Artículo 1
Annex V to Implementing Regulation (EU) 2022/1362 is corrected in accordance with the Annex to this Regulation.
Artículo 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union .
It shall apply from 25 August 2022.
Anexo 1ANNEX
In Annex V to Implementing Regulation (EU) 2022/1362, point 3.2. is corrected as follows:
(1) in Table 2, the following row is added: ‘Ground surface and wheels 25,00 m/s The ground surface of the simulation domain has to move backwards relative to the vehicle and the wheels of the vehicles have to rotate with the corresponding tangential velocity.’
(2) Table 3 is replaced by the following: ‘Table 3 Reference ranges for the validation process Simulation set Yaw Angle – β [deg] 0,0 ° 3,0 ° 6,0 ° TRF -8,6 % < Δ(C D ×A) < -1,6 % -9,0 % < Δ(C D ×A) < -2,0 % -10,3 % < Δ(C D ×A) < -3,3 % LSC -8,8 % < Δ(C D ×A) < -1,8 % -8,0 % < Δ(C D ×A) < -1,0 % -8,1 % < Δ(C D ×A) < -1,1 %’