Commission Implementing Regulation (EU) 2017/59 of 14 December 2016 concerning the authorisation of 1,1-dimethoxy-2-phenylethane, phenethyl formate, phenethyl octanoate, phenethyl isobutyrate, phenethyl 2-methyl-butyrate and phenethyl benzoate as feed additives for all animal species (Text with EEA relevance. )
Allegato 1ANNEX
In vigore · versione del 6 feb 2017
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % (1) (2) (3) (4) (5) (6) (7) (8) (9) Category: Sensory additives. Functional group: Flavouring compounds 2b06006 — 1,1-Dimethoxy-2-phenylethane Additive composition 1,1-Dimethoxy-2-phenylethane Characterisation of the active substance 1,1-Dimethoxy-2-phenylethane Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 10 H 14 O 2 CAS number 101-48-4 FLAVIS No 06.006 Method of analysis ( 1 ) For the identification of 1,1-dimethoxy-2-phenylethane in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b09083 — Phenethyl formate Additive composition Phenethyl formate Characterisation of the active substance Phenethyl formate Produced by chemical synthesis Purity: min. 96 % Chemical formula: C 9 H 10 O 2 CAS number 104-62-1 FLAVIS No 09.083 Method of analysis ( 1 ) For the identification of phenethyl formate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b09262 — Phenethyl octanoate Additive composition Phenethyl octanoate Characterisation of the active substance Phenethyl octanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 16 H 24 O 2 CAS number 5457-70-5 FLAVIS No 09.262 Method of analysis ( 1 ) For the identification of phenethyl octanoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b09427 — Phenethyl isobutyrate Additive composition Phenethyl isobutyrate Characterisation of the active substance Phenethyl isobutyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 12 H 16 O 2 CAS number 103-48-0 FLAVIS No 09.427 Method of analysis ( 1 ) For the identification of phenethyl isobutyrate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b09538 — Phenethyl 2-methyl-butyrate Additive composition Phenethyl 2-methyl-butyrate Characterisation of the active substance Phenethyl 2-methyl-butyrate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 13 H 18 O 2 CAS number 24817-51-4 FLAVIS No 09.538 Method of analysis ( 1 ) For the identification of phenethyl 2-methyl-butyrate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.. 6 February 2027 2b09774 — Phenethyl benzoate Additive composition Phenethyl benzoate Characterisation of the active substance Phenethyl benzoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 15 H 14 O 2 CAS number 94-47-3 FLAVIS No 09.774 Method of analysis ( 1 ) For the identification of phenethyl benzoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027