Commission Implementing Regulation (EU) 2017/61 of 14 December 2016 concerning the authorisation of 4-allyl-2,6-dimethoxyphenol and eugenyl acetate as feed additives for all animal species except for fish and poultry (Text with EEA relevance. )
Allegato 1ANNEX
In vigore · versione del 6 feb 2017
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % (1) (2) (3) (4) (5) (6) (7) (8) (9) Category: Sensory additives. Functional group: Flavouring compounds 2b04051 — 4-Allyl-2,6-dimethoxyphenol Additive composition 4-Allyl-2,6-dimethoxyphenol Characterisation of the active substance 4-Allyl-2,6-dimethoxyphenol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 11 H 14 O 3 CAS number 6627-88-9 FLAVIS No 04.051 Method of analysis ( 1 ) For the identification of 4-allyl-2,6-dimethoxyphenol in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal speciesexcept fish and poultry) — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027 2b09020 — Eugenyl acetate Additive composition Eugenyl acetate Characterisation of the active substance Eugenyl acetate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 12 H 14 O 3 CAS number 93-28-7 FLAVIS No 09.020 Method of analysis ( 1 ) For the identification of eugenyl acetate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except fish and poultry. — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including gloves. 6 February 2027