Commission Implementing Regulation (EU) 2017/656 of 19 December 2016 laying down the administrative requirements relating to emission limits and type-approval of internal combustion engines for non-road mobile machinery in accordance with Regulation (EU) 2016/1628 of the European Parliament and of the Council (Text with EEA relevance. )
Allegato VIIIANNEX VIII
In vigore · versione del 7 ago 2018
Templates and data structure for the exchange of data by means of IMI
The IMI system shall allow for the exchange of at least the following data between approval authorities; the structure and numbering of the data shall be respected.
1. Make(s) (trade name(s) of manufacturer): …
2. Commercial name(s) (if applicable): …
3. Company name of manufacturer: … 3.1. Postal address / Street and number of manufacturer: … 3.1.1. Postal code: … 3.1.2. Country / Region: …
4. Name of manufacturer's authorised representative (if any): … 4.1. Postal address / Street and number of manufacturer's authorised representative: … 4.1.1. Postal code: … 4.1.2. Country / Region: …
5. Name(s) of assembly/manufacture plant(s): … 5.1. Postal address (es) / Street(s) and number(s) of assembly/manufacture plant(s): … 5.1.1. Postal code(s): … 5.1.2. Country (ies) / Region(s): …
6. Engine type designation/engine family designation /FT ( 1 ) ( 2 ): …
7. Category and sub-category of the engine type/engine family ( 1 ) ( 3 ): … 7.1. Engine identification number of tested engine ( 4 ): …
8. EU type-approval: granted/extended/revised/refused/ withdrawn ( 1 ) ( 5 ) 8.1. Date of granting/extending/revising/refusing/withdrawing ( 1 ) the EU type-approval ( 5 )
9. Number of the EU type-approval (except if refused) ( 5 ): …
10. Emissions stage: V/ SPE ( 1 ) ( 5 )
11. Exemption for new technologies or new concepts in accordance with Article 35 of Regulation (EU) 2016/1628 ( 5 ) ( 6 ) 11.1 Validity of the approval limited to dd/mm/yyyy ( 5 ) ( 6 ) 11.2. Restrictions to validity ( 5 ) ( 6 ): … 11.3. Exemptions applied ( 5 ) ( 6 ): …
12. Final emissions result ( 7 ) 12.1 Cycle emissions results Emissions CO (g/kWh) HC (g/kWh) NO x (g/kWh) HC+NO x (g/kWh) PM (g/kWh) PN #/kWh Test Cycle NRSC final result with DF NRTC Final test result with DF 12.2 CO 2 result: …
Explanatory notes to Annex VIII:
(Footnote markers, footnotes and explanatory notes not to be stated)
( 1 ) Strike out the unused options, or only show the used option(s).
( 2 ) Indicate the engine type designation /engine family designation in accordance with entries 1.6 and 3.1.1 of the information document set out in Appendix 3 to Annex I.
( 3 ) Indicate the applicable option for the category and sub-category in accordance with entry 1.7 of the information document set out in Part A of Appendix 3 to Annex I.
( 4 ) Indicate the information from entry 2.2 of Appendix 1 to Annex VI (test report).
( 5 ) Indicate the applicable value of the EU type-approval certificate as set out in Annex IV.
( 6 ) State this entry only for EU type-approvals of an engine type or an engine family as an exemption for new technologies or new concepts, pursuant to Article 35 of Regulation (EU) 2016/1628.
( 7 ) Indicate the information from section 11 of Appendix 1 to Annex VI (test report).