Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance.)
Allegato IXANNEX IX
In vigore · versione del 27 mag 2025
Minimum data and information to be retained in accordance with Article 67(1)
Operators, aircraft operators and regulated entities shall retain at least the following:
1. COMMON ELEMENTS FOR INSTALLATIONS, AIRCRAFT OPERATORS AND REGULATED ENTITIES
(1) The monitoring plan approved by the competent authority;
(2) Documents justifying the selection of the monitoring methodology and the documents justifying temporal or non-temporal changes of monitoring methodologies and, where applicable, tiers approved by the competent authority;
(3) All relevant updates of monitoring plans notified to the competent authority in accordance with Article 15, and the competent authority’s replies;
(4) All written procedures referred to in the monitoring plan, including the sampling plan where relevant, the procedures for data flow activities and the procedures for control activities;
(5) A list of all versions used of the monitoring plan and all related procedures;
(6) Documentation of the responsibilities in connection to the monitoring and reporting;
(7) The risk assessment performed by the operator, aircraft operator or regulated entity, where applicable;
(8) The improvement reports in accordance with Article 69;
(9) The verified annual emission report;
(10) The verification report;
(11) Any other information that is identified as required for the verification of the annual emissions report.
2. SPECIFIC ELEMENTS FOR STATIONARY INSTALLATIONS
(1) The greenhouse gas emissions permit, and any updates thereof;
(2) Any uncertainty assessments, where applicable;
(3) For calculation-based methodologies applied in installations: (a) the activity data used for any calculation of the emissions for each source stream, categorised according to process and fuel or material type; (b) a list of all default values used as calculation factors, where applicable; (c) the full set of sampling and analysis results for the determination of calculation factors; (d) documentation about all ineffective procedures corrected and correction action taken in accordance with Article 64; (e) any results of calibration and maintenance of measuring instruments.
(4) For measurement-based methodologies in installations, the following additional elements: (a) documentation justifying the selection of a measurement-based methodology; (b) the data used for the uncertainty analysis of emissions from each emission source, categorised according to process; (c) the data used for the corroborating calculations and results of the calculations; (d) a detailed technical description of the continuous measurement system including the documentation of the approval from the competent authority; (e) raw and aggregated data from the continuous measurement system, including documentation of changes over time, the log-book on tests, down-times, calibrations, servicing and maintenance; (f) documentation of any changes to the continuous measurement system; (g) any results of the calibration and maintenance of measuring instruments; (h) where applicable, the mass or energy balance model used for the purpose of determining surrogate data in accordance with Article 45(4) and underlying assumptions;
(5) Where a fall-back methodology as referred to in Article 22 is applied, all data necessary for determining the emissions for the emission sources and source streams for which that methodology is applied, as well as proxy data for activity data, calculation factors and other parameters which would be reported under a tier methodology;
(6) For primary aluminium or alumina production, the following additional elements: (a) documentation of results from measurement campaigns for the determination of the installation specific emission factors for CF 4 and C 2 F 6 ; (b) documentation of the results of the determination of the collection efficiency for fugitive emissions; (c) all relevant data on primary aluminium production, anode effect frequency and duration or overvoltage data;
(7) For CO 2 capture, transport and geological storage activities, where applicable, the following additional elements: (a) documentation of the amount of CO 2 injected into the storage complex by installations carrying out geological storage of CO 2 ; (b) representatively aggregated pressure and temperature data from a transport infrastructure; (c) a copy of the storage permit, including the approved monitoring plan, pursuant to Article 9 of Directive 2009/31/EC; (d) the reports submitted in accordance with Article 14 of Directive 2009/31/EC; (e) reports on the results of the inspections carried out in accordance with Article 15 of Directive 2009/31/EC; (f) documentation on corrective measures taken in accordance with Article 16 of Directive 2009/31/EC.
(8) For CO 2 permanently chemically bound, where applicable, the following additional elements: (a) documentation of the amount of CO 2 permanently chemically bound; (b) the types of products the CO 2 was chemically bound, their amounts produced and the respective uses of the products;
3. SPECIFIC ELEMENTS FOR AVIATION ACTIVITIES
(1) A list of aircraft owned, leased-in and leased-out, and necessary evidence for the completeness of that list; for each aircraft the date when it is added to or removed from the aircraft operator’s fleet;
(2) A list of flights covered in each reporting period including, for each flight, the ICAO designator of the two aerodromes, and necessary evidence for the completeness of that list;
(3) Relevant data used for determining the fuel consumption and emissions;
(4) For the purposes of monitoring emission, documentation on the methodology for data gaps where applicable, the number of flights where data gaps occurred, the data used for closing the data gaps, where they occurred, and, where the number of flights with data gaps exceeded 5 % of flights that were reported, reasons for the data gaps as well as documentation of remedial actions taken;
(5) For the purpose of monitoring and reporting of non-CO 2 aviation effects, all data monitored by the aircraft operator pursuant to Article 56b(2) of this Regulation, where such data is used to calculate the CO 2 (e) per flight in accordance with the method referred to in Article 56a of this Regulation;
(6) For the purpose of monitoring non-CO 2 aviation effects and where the aircraft operator does not use NEATS, the number of flights where data gaps occurred and appropriate default values used of Annex IIIa, Section 5 and Annex IIIb to this Regulation for closing the data gaps.
4. SPECIFIC ELEMENTS FOR REGULATED ENTITIES
(1) A list of fuel streams in each reporting period and necessary evidence for completeness of that list, including the categorisation of fuel streams;
(2) the means through which the fuels as defined in Article 3, point (af) of Directive 2003/87/EC are released for consumption and where available, the types of intermediate consumers, where this would not cause disproportionate administrative burden;
(3) the type of end use, including the relevant CRF code of the final sectors in which the fuel as defined in Article 3, point (af), of Directive 2003/87/EC is consumed, at the level of aggregation available;
(4) relevant data used for determining the released fuel amounts for each fuel stream;
(5) a list of default values used and calculation factors, where applicable;
(6) the scope factor for each fuel stream, including an identification of each final consumption sector and all relevant underlying data for this identification;
(7) the tiers applicable including justifications for deviation from required tiers;
(8) the full set of sampling and analysis results for the determination of calculation factors;
(9) documentation about all ineffective procedures corrected and correction action taken in accordance with Article 64;
(10) any results of calibration and maintenance of measuring instruments;
(11) a list of installations to which fuel as defined in Article 3 (af) of Directive 2003/87/EC is released for consumption, including names, address and permit number and released fuel amounts supplied to those installations for the reporting periods.