Preambolo 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition ( 1 ) , and in particular Article 13(3) thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such an authorisation.
recital 2recital 2
(2) The use of the organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 as a feed additive was authorised for all animal species by Commission Implementing Regulation (EU) 2019/804 ( 2 ) .
recital 3recital 3
(3) In accordance with Article 13(1) of Regulation (EC) No 1831/2003, the Commission requested the European Food Safety Authority (‘the Authority’) to issue an opinion on whether the authorisation of the organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 as a feed additive would still meet the conditions laid down in Article 5 of Regulation (EC) No 1831/2003, if modified as proposed by the applicant. That modification consists of increasing the minimum concentration of selenium in the feed additive. The request was accompanied by the relevant supporting data.
recital 4recital 4
(4) The Authority concluded in its opinion of 10 November 2021 ( 3 ) that the modification of the terms of authorisation proposed by the applicant do not modify the conclusions reached in the previous assessments on the safety for the target species, consumers, environment and efficacy of the feed additive. The Authority concluded that the additive is hazardous by inhalation, is not irritant for the eyes, skin and is not a dermal sensitiser. The Authority did not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
recital 5recital 5
(5) In view of the Authority’s opinion, the Commission therefore considers that appropriate protective measures should be taken to prevent adverse effects on human health, in particular as regards the users of the additive.
recital 6recital 6
(6) The assessment of the modification to the authorisation proposed by the applicant shows that the conditions for authorisation set out in Article 5 of Regulation (EC) No 1831/2003 are fulfilled.
recital 7recital 7
(7) Implementing Regulation (EU) 2019/804 should therefore be amended accordingly.
recital 8recital 8
(8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
Articolo 1
In the Annex to Implementing Regulation (EU) No 2019/804, the entry 3b810 for the organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 is amended in accordance with the Annex to this Regulation.
Articolo 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Allegato 1ANNEX
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method. Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation Selenium in mg/kg of complete feed with a moisture content of 12 % Category of nutritional additives. Functional group: compounds of trace elements ‘3b810 - Selenised yeast Saccharomyces cerevisia e CNCM I-3060, inactivated Additive composition Preparation of organic selenium: Content of selenium: 2 000 to 2 400 mg Se/kg Organic selenium > 97 to 99 % of total selenium Selenomethionine > 63 % of total selenium All species - 0,50 (total) 1. The additive shall be incorporated into feed in the form of a premixture. 2. The directions for use of the additive and premixtures shall indicate the storage and stability conditions. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment. 4. Maximum supplementation with organic selenium: 0,2 mg Se/kg of complete feed with a moisture content of 12 %. 9 June 2029 Characterisation of the active substance Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060 Chemical formula: C 5 H 11 NO 2 Se Analytical method ( 1 ) : For the determination of selenomethionine in the feed additive: — reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or — high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion. For the determination of total selenium in the feed additive: — inductively coupled plasma atomic emission spectrometry (ICP-AES) or — inductively coupled plasma mass spectrometry (ICPMS). For the determination of total selenium in premixtures, compound feed and feed materials: — hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012). 3b810i - Selenised yeast Saccharomyces cerevisia e CNCM I-3060, inactivated Additive composition Preparation of organic selenium: Content of selenium 3 000 -3 500 mg Se/kg Organic selenium > 97 to 99 % of total selenium Selenomethionine > 63 % of total selenium All species - 0,50 (total) 1. The additive shall be incorporated into feed in the form of a premixture. 2. The directions for use of the additive and premixtures shall indicate the storage and stability conditions. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection. 4. Maximum supplementation with organic selenium: 0,2 mg Se/kg of complete feed with a moisture content of 12 %. 5. The dusting potential of the additive shall ensure a maximal Se exposure of 0,2 mg Se/m 3 9 June 2029 Characterisation of the active substance Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060 Chemical formula: C 5 H 11 NO 2 Se Analytical method ( 1 ) For the determination of selenomethionine in the feed additive: — reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or — high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion. For the determination of total selenium in the feed additive: — inductively coupled plasma atomic emission spectrometry (ICP-AES) or — inductively coupled plasma mass spectrometry (ICPMS). For the determination of total selenium in premixtures, compound feed and feed materials: — hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).