Commission Implementing Regulation (EU) 2026/1842 of 28 July 2026 laying down detailed rules for the application of Regulation (EU) 2026/715 of the European Parliament and of the Council as regards proceedings relating to a registered EU design, and repealing Commission Implementing Regulation (EU) 2026/138
Preambolo 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2026/715 of the European Parliament and of the Council of 11 March 2026 on European Union designs ( 1 ) , and in particular Article 32, Article 43, Article 45, Article 51, Article 54, Article 61, Article 65, Article 68, Article 70, Article 72, Article 102, Article 108, Article 114, Article 138, and Article 145 thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Council Regulation (EC) No 6/2002 ( 2 ) created a system specific to the Union for the protection of designs obtained at Union level on the basis of an application to the European Union Intellectual Property Office (‘the Office’).
recital 2recital 2
(2) Regulation (EU) 2024/2822 of the European Parliament and of the Council ( 3 ) amended Regulation (EC) No 6/2002 by aligning the powers conferred upon the Commission with Articles 290 and 291 of the Treaty on the Functioning of the European Union. Commission Delegated Regulation (EU) 2026/137 ( 4 ) and Commission Implementing Regulation (EU) 2026/138 ( 5 ) were adopted to conform with the new legal framework resulting from that alignment.
recital 3recital 3
(3) Regulation (EC) No 6/2002 was codified as Regulation (EU) 2026/715. For reasons of clarity and simplification, the references contained in an implementing regulation are to reflect the renumbering of articles resulting from such a codification of the relevant basic act. The provisions of Implementing Regulation (EU) 2026/138 should therefore be updated with the references to Regulation (EU) 2026/715.
recital 4recital 4
(4) In the interest of legal certainty, consistency and simplification, the rules set out in this Regulation should be aligned to the extent possible with the rules applicable to EU trade marks as laid down in Commission Implementing Regulation (EU) 2018/626 ( 6 ) .
recital 5recital 5
(5) For reasons of clarity, legal certainty and efficiency, and with a view to facilitating the filing of EU design applications, it is of essential importance to specify, in a clear and exhaustive manner while avoiding unnecessary administrative burden, the mandatory and optional particulars to be contained in an application for a registered EU design, including in a multiple application.
recital 6recital 6
(6) Regulation (EU) 2026/715 broadens the definitions of a design and product to entail new designs which are not embodied in physical products. Taking into account technical advances in relation to the visualisation of designs and the needs of Union industry in relation to new digital designs, it is necessary to allow for dynamic and animated representation of designs by any appropriate means using generally available technology.
recital 7recital 7
(7) It is appropriate to streamline proceedings to reduce administrative burden in the filing and processing of priority claims. To that end, a copy of the previous application should be submitted for claiming the priority of a previous application.
recital 8recital 8
(8) In order to ensure the publication of all the information concerning a registration of an EU design, which is required for reasons of transparency and legal certainty, and following the broadening of the technical means for visual representation of a design, including dynamic or animated representations, it should be possible for the Office to publish the registration of an EU design by making the representation of the design accessible electronically.
recital 9recital 9
(9) For the same reasons, it should also be possible for the Office to issue certificates of registration in which the representation of the design is provided by electronic access to the relevant file.
recital 10recital 10
(10) Regulation (EU) 2026/715 provides for requests for alteration of the representation of a registered EU design in immaterial details, abandoning the possibility to partially surrender and to partially invalidate a registered EU design. In the interest of clarity and legal certainty, it is important to specify the requirements for a request for alteration of the representation of a registered EU design in a clear and exhaustive manner.
recital 11recital 11
(11) In order to ensure legal certainty and predictability, maximum rates for representation costs incurred by the successful party to proceedings before the Office should be specified, taking into account the need to ensure that the obligation to bear the costs is not to be misused, inter alia, for tactical reasons by the other party.
recital 12recital 12
(12) For reasons of administrative efficiency, the Office should be able to publish periodical publications in any electronic form supported by the Office, including in the form of a searchable database.
recital 13recital 13
(13) In order to enable and facilitate efficient administrative cooperation, it is necessary to ensure an effective and efficient exchange of information between the Office and the authorities of the Member States in the context of such cooperation, taking appropriate account of the restrictions to which the inspection of files is subject.
recital 14recital 14
(14) In order to streamline proceedings before the Office, it should be possible to limit the submission of translations to those parts of documents that are relevant to the proceedings. For the same purpose, the Office should be authorised to require proof that a translation corresponds to the original only in the event of doubt.
recital 15recital 15
(15) For reasons of efficiency and given their non-complex nature and the fact that they do not touch upon the merits of the case, decisions of the Office on the apportionment and fixing of costs as well as on admissibility and certain other procedural questions in relation to applications for a declaration of invalidity of a registered EU design should be taken by a single member of the Invalidity Division.
recital 16recital 16
(16) Implementing Regulation (EU) 2026/138 should therefore be repealed.
recital 17recital 17
(17) Commission Regulation (EC) No 2245/2002 ( 7 ) was repealed. Its rules were replaced by Delegated Regulation (EU) 2026/137 and Implementing Regulation (EU) 2026/138. In the interest of legal certainty, it is necessary to continue to apply Regulation (EC) No 2245/2002 to certain proceedings that had been initiated before the date of applicability of Implementing Regulation (EU) 2026/138 until the conclusion of those proceedings.
recital 18recital 18
(18) The measures provided for in this Regulation are in accordance with the opinion of the Committee on Implementation Rules,
Articolo 1Content of the application
1. In addition to the requirements set out in Article 42(1), (2) and (3), and Article 48 of Regulation (EU) 2026/715, the application for a registered EU design shall contain: (a) the name and address of the applicant; (b) the nationality of the applicant; (c) where the applicant has appointed a representative, the name and either the business address of that representative or the identification number assigned by the Office; (d) a mention of the language in which the application has been filed, and of the second language pursuant to Article 137(2) of Regulation (EU) 2026/715; (e) the signature of the applicant or the applicant’s representative made in accordance with the second sentence of Article 17(1) of Commission Delegated Regulation (EU) 2026/1841 ( 8 ) .
2. The name and address referred to in paragraph 1, point (a), shall contain the name and the address at which the applicant is domiciled or has a seat or an establishment. Names of natural persons shall be indicated by the person’s family name(s) and given name(s). Names of legal entities, as well as bodies falling within the scope of Article 3 of Regulation (EU) 2026/715 shall be indicated by their official designation and shall include the legal form of the entity, which may be abbreviated in a customary manner. The company’s national identification number may also be specified, where available. The Office may require the applicant to provide telephone numbers or other contact details for communication by electronic means as determined by the Executive Director. Only one address shall, in principle, be indicated for each applicant. Where several addresses are indicated, only the address mentioned first shall be taken into account, except where the applicant designates one of the addresses as an address for service. Where the Office has assigned an identification number, it shall be sufficient for the applicant to indicate that number and the name of the applicant.
3. Where the representative referred to in paragraph 1, point (c), has more than one business address or where there are two or more representatives with different business addresses, only the first-mentioned address shall be taken into account as an address for service unless the application indicates which address is to be used as an address for service.
4. The description referred to in Article 42(3), point (a), of Regulation (EU) 2026/715 shall not exceed 100 words. The description shall relate only to those features which appear in the representation of the design. It shall not contain statements as to the purported novelty or individual character of the design or its technical value.
5. Article 42(1), point (c), Article 42(2), Article 42(3), points (a), (b), (d) and (e), Article 50(1), and Article 53(2) of Regulation (EU) 2026/715 shall apply mutatis mutandis to each design contained in a multiple application.
Articolo 2Representation of the design
1. The design shall be represented visually, either in black and white or in colour. The representation can be static, dynamic or animated and shall be effected by any appropriate means, using generally available technology, including drawings, photographs, videos, computer imaging or computer modelling.
2. The representation shall show in a consistent way all the features of the design for which protection is sought. The subject matter of the registration shall be determined by all the visual features of all views or reproductions combined.
3. The design shall be represented alone to the exclusion of any other matter. However, the representation of the design may include matter for which no protection is sought, provided that they are identified by visual disclaimers, as determined by the Executive Director in accordance with Article 42(5) of Regulation (EU) 2026/715. Visual disclaimers shall be applied consistently across all views.
Articolo 3Claiming priority
1. A copy of the previous application shall be filed in support of the priority claim pursuant to Article 50(1) of Regulation (EU) 2026/715. In accordance with Article 4D(3) of the Paris Convention for the Protection of Industrial Property, that copy shall emanate from the authority that received it and contain the same information as the original application including the representation of the design, in colour where applicable. It shall state or be accompanied by a statement containing the file number and the filing date of the previous application.
2. Where the language of the previous application for which priority is claimed is not one of the languages of the Office, the applicant shall provide, where the Office so requires, a translation of the previous application into the language of the Office used as the first or second language of the application for a registered EU design, within a period determined by the Office.
Articolo 4Exhibition priority
1. Where exhibition priority is claimed pursuant to Article 53 of Regulation (EU) 2026/715, the applicant shall make a declaration to that effect, stating the name of the exhibition and the date of first disclosure of the products in which the design is incorporated or to which it is applied.
2. A certificate issued at the exhibition by the authority responsible for the protection of industrial property shall be filed in support of the exhibition priority claim pursuant to Article 53(2) of Regulation (EU) 2026/715. That certificate shall attest that the design incorporated in or applied to the product was disclosed at the exhibition. It shall also state the opening date of the exhibition and the date of first disclosure of the product where the latter date is different from the opening date of the exhibition. The certificate shall include or make clear reference to a representation of the design as disclosed in the exhibition.
Articolo 5Content of the publication of a registration
1. The publication of the registered EU design in accordance with Article 60 of Regulation (EU) 2026/715 shall contain the following information: (a) the name, city and country of the holder of the registered EU design; (b) where applicable, the name and business address of the representative appointed by the holder other than a representative falling within the first subparagraph of Article 115(3) of Regulation (EU) 2026/715; (c) the representation of the design pursuant to Article 2; where the representation of the design is in colour, the publication shall be in colour; (d) where applicable, an indication that a description has been filed pursuant to Article 42(3), point (a) of Regulation (EU) 2026/715; (e) an indication of the products in which the design is intended to be incorporated or to which it is intended to be applied, preceded by the number of the relevant classes and subclasses of the Locarno Agreement establishing an International Classification for Industrial Designs, signed in Locarno on 8 October 1968, and grouped accordingly; (f) where applicable, the name of the designer or the names of the designers forming part of a team; or a statement that the designer or designers waived the right to be cited; (g) the date of filing and registration pursuant to Article 59(3) of Regulation (EU) 2026/715 and the file number and, in the case of a multiple application, the file number of each individual design; (h) where applicable, particulars of the claim of priority in accordance with Article 50 of Regulation (EU) 2026/715; (i) where applicable, particulars of the claim of exhibition priority pursuant to Article 53 of Regulation (EU) 2026/715; (j) the date of registration of the design in the Register of EU designs referred to in Article 104 of Regulation (EU) 2026/715 (‘the Register’) and the registration number pursuant to Article 59(1) of that Regulation, and the date of the publication of the registration; (k) an indication of the language in which the application was filed and of the second language indicated by the applicant in accordance with Article 137(2) of Regulation (EU) 2026/715; (l) where applicable, an indication of the deferment of the publication pursuant to Article 62 of Regulation (EU) 2026/715, specifying the date of expiry of the period of deferment.
2. For the purposes of paragraph 1, point (c), the Office may publish the representation of the design by making the representation accessible electronically.
3. Where there is more than one representative with the same business address referred to in paragraph 1, point (b), of this Article, only the name and business address of the first-named representative shall be published, and it shall be followed by the words ‘and others’. Where there are two or more representatives with different business addresses, only the address for service determined pursuant to Article 1(3) of this Regulation shall be published. Where an association of representatives is appointed in accordance with Article 74(8) of Commission Delegated Regulation (EU) 2018/625 ( 9 ) in conjunction with Article 26 of Delegated Regulation (EU) 2026/1841, only the name and business address of the association shall be published.
4. Where the application for a registered EU design contains a request for deferment of publication pursuant to Article 62 of Regulation (EU) 2026/715, the content of the publication of the registration shall indicate that request and shall include the information established in paragraph 3 of that Article.
Articolo 6Certificate of registration
1. The certificate of registration issued in accordance with Article 64 of Regulation (EU) 2026/715 shall contain the entries in the Register listed in Article 104(2) of that Regulation and a statement to the effect that those entries have been recorded in the Register. The certificate of registration may incorporate the representation of the design by providing electronic access to the relevant file.
2. The certificate of registration shall be complemented, where applicable, by an extract showing all entries to be recorded in the Register in accordance with Article 104(3) of Regulation (EU) 2026/715 and a statement to the effect that those entries have been recorded in the Register.
Articolo 7Content of the request for alteration
A request for alteration of the representation of a registered EU design in immaterial details, in accordance with Article 67 of Regulation (EU) 2026/715 shall contain the following information:
(a) the registration number of the registered EU design;
(b) the name and the address of the holder of the registered EU design in accordance with Article 1(1), point (a), and Article 1(2) of this Regulation;
(c) an indication of the features to be altered and the view or views to be altered or withdrawn;
(d) a representation of the design as altered, in accordance with Article 2 of this Regulation.
Articolo 8Content of a request for the change of name or address
1. A request for a change of name or address of the holder of a registered EU design made in accordance with Article 69 of Regulation (EU) 2026/715 shall contain the following information: (a) the registration number of the registered EU design; (b) the name and the address of the holder of the registered EU design as recorded in the Register, unless an identification number has already been given by the Office to the holder, in which case it shall be sufficient to indicate that number and the holder’s name; (c) the indication of the new name and address of the holder of the registered EU design, in accordance with Article 1(1), point (a), and Article 1(2) of this Regulation.
2. Paragraph 1, points (b) and (c), shall apply mutatis mutandis for the purposes of a request for the change of the name or address of the applicant for a registered EU design. Such request shall also contain the application number of the EU design.
3. Paragraphs 1 and 2 shall apply mutatis mutandis to a change of the name or address of the registered representative.
Articolo 9Application for the registration of a transfer
1. An application for the registration of a transfer in accordance with Article 31 of Regulation (EU) 2026/715 shall contain the following information: (a) the registration number of the registered EU design; (b) particulars of the new holder in accordance with Article 1(1), point (a), and Article 1(2) of this Regulation; (c) where not all of the designs covered by a multiple registration are included in the transfer, particulars of the registered designs subject of the transfer; (d) evidence duly establishing the transfer in accordance with Article 31(1) of Regulation (EU) 2026/715; (e) where applicable, the name and business address of the representative of the new holder, in accordance with Article 1(1), point (c), and Article 1(3) of this Regulation.
2. Paragraph 1, points (b) to (e), shall apply mutatis mutandis to a request for the recording of a transfer of an EU design application. Such request shall also contain the application number of the EU design. The transfer shall be recorded in the files kept by the Office concerning the relevant EU design application.
3. For the purposes of paragraph 1, point (d), any of the following shall constitute sufficient evidence of transfer: (a) the application for registration of the transfer signed by the registered holder and by the successor in title; (b) where the application for registration of the transfer is submitted by the registered holder, a declaration signed by the successor in title agreeing to the registration of the transfer; (c) where the application for registration of the transfer is submitted by the successor in title, a declaration, signed by the registered holder, that the registered holder agrees to the registration of the successor in title; (d) a completed transfer form or document referred to in Article 18 of Delegated Regulation (EU) 2026/1841, signed by the registered holder and by the successor in title.
4. An application for registration of a transfer may be signed by the authorised representatives of the parties, who may be the same representative for both parties.
Articolo 10Surrender
1. A declaration of surrender of a registered EU design made in accordance with Article 71(1) of Regulation (EU) 2026/715 shall contain the following information: (a) the registration number of the registered EU design; (b) the name and address of the holder of the registered EU design in accordance with Article 1(1), point (a), and Article 1(2) of this Regulation; (c) where surrender is declared only for some of the designs contained in a multiple registration, an indication of the designs for which the surrender is declared.
2. Where a right of a third party relating to the registered EU design is entered in the Register, a declaration of consent to the surrender, signed by the holder of that right or the representative of that holder, shall be sufficient proof of the third party’s agreement to the surrender.
3. Where proceedings relating to the entitlement to a registered EU design have been instituted before the competent court or authority in accordance with Article 15 of Regulation (EU) 2026/715, a declaration of consent to the surrender, signed by the claimant or the representative of that claimant, shall be sufficient proof of the claimant’s agreement to the surrender.
Articolo 11Maximum rates for costs
1. Costs referred to in Article 101(1) of Regulation (EU) 2026/715 shall be borne by the losing party on the basis of the following maximum rates: (a) where the successful party is not represented by a representative referred to in Article 116(1) of Regulation (EU) 2026/715, the travel and subsistence costs of that party for one person for the outward and return journey between the place of residence or the place of business and the place where oral proceedings are held pursuant to Article 49 of Delegated Regulation (EU) 2018/625 in conjunction with Article 11 of Delegated Regulation (EU) 2026/1841, shall be determined as follows: (i) the cost of the first-class rail fare including usual transport supplements where the total distance by rail does not exceed 800 km or the cost of the economy-class airfare where the total distance by rail exceeds 800 km or the route includes a sea crossing; (ii) subsistence costs laid down in Article 13 of Annex VII to the Staff Regulations of Officials of the Union and the Conditions of Employment of Other Servants of the Union, laid down in Council Regulation (EEC, Euratom, ECSC) No 259/68 ( 10 ) ; (b) travel costs of representatives referred to in Article 116(1) of Regulation (EU) 2026/715, at the rates provided for in point (a)(i) of this paragraph; (c) costs of representation, within the meaning of Article 116(1) of Regulation (EU) 2026/715 incurred by the successful party, as follows: (i) in proceedings relating to the invalidity of a registered EU design: EUR 450; (ii) in appeal proceedings: EUR 550; (iii) where oral proceedings have taken place to which the parties have been summoned pursuant to Article 49 of Delegated Regulation (EU) 2018/625 in conjunction with Article 11 of Delegated Regulation (EU) 2026/1841, the amount referred to in points (i) or (ii) of this point shall be increased by EUR 400.
2. Where there are several holders of the registered EU design or where there are several applicants in a joint application for a declaration of invalidity, the losing party shall bear the costs referred to in paragraph 1, point (a), for one such holder or for one such applicant only, as appropriate.
3. Where the successful party is represented by more than one representative within the meaning of Article 116(1) of Regulation (EU) 2026/715, the losing party shall bear the costs referred to in paragraph 1, points (b) and (c), of this Article only for one such representative.
4. The losing party shall not be required to reimburse the successful party for any costs, expenses and fees other than those referred to in paragraphs 1, 2 and 3.
Articolo 12Periodical publications
1. Where particulars are published in the European Union Designs Bulletin in accordance with Regulation (EU) 2026/715, Delegated Regulation (EU) 2026/1841 or this Regulation, the date of publication in the Bulletin shall be considered as the date of publication of the particulars.
2. All particulars referred to in paragraph 1 of this Article may refer or link to data already contained in the database referred to in Article 105 of Regulation (EU) 2026/715 or in the Register.
3. The European Union Designs Bulletin shall be published in all the official languages of the Union, where appropriate.
4. The Official Journal of the European Union Intellectual Property Office may be made publicly available in any electronic form supported by the Office, including in the form of a searchable database.
Articolo 13Exchange of information and communications
1. The Office and the central industrial property offices of the Member States, including the Benelux Office for Intellectual Property, shall, upon request, communicate to each other relevant information about the filing of applications for registered EU designs or national designs and about proceedings relating to such applications and the designs registered as a result thereof.
2. The Office and the courts or authorities of the Member States shall exchange information for the purposes of Regulation (EU) 2026/715 directly or through the central industrial property offices of the Member States.
3. The information referred to in paragraphs 1 and 2 shall be, where possible, exchanged by electronic means.
4. The cost in respect of communication of information referred to in paragraphs 1 and 2 shall be chargeable to the authority making the communications. Such communications shall be exempt from fees.
Articolo 14Opening of files for inspection
1. Inspection of files relating to EU design applications or registered EU designs by courts or authorities of the Member States shall be carried out where possible by electronic means.
2. The Office shall, at the time of transmission of files relating to EU design applications or registered EU designs, to the courts or public prosecutors’ offices of the Member States, indicate the restrictions to which the inspection of those files is subject to in accordance with Article 109 of Regulation (EU) 2026/715.
3. Courts or public prosecutors’ offices of the Member States may, in the course of proceedings before them, open files transmitted to them by the Office to inspection by third parties. Such inspection shall be subject to the restrictions under Article 109 of Regulation (EU) 2026/715.
Articolo 15Filing of supporting documents in written proceedings
Unless otherwise provided for in Regulation (EU) 2026/715, in Delegated Regulation (EU) 2026/1841 or in this Regulation, supporting documents to be used in written proceedings before the Office may be filed in any official language of the Union. Where the language of such documents is not in the language of the proceedings as determined in accordance with Article 137 of Regulation (EU) 2026/715, the Office may, of its own motion or upon reasoned request by the other party, require that a translation in the language of the proceedings be supplied, within a period determined by it.
Articolo 16Standards of translations
1. Where a translation of a document is to be filed with the Office, the translation shall identify the document to which it refers and replicate the structure and contents of the original document. Where a party has indicated that only parts of the document are relevant, the translation may be limited to those parts.
2. Unless otherwise provided for in Regulation (EU) 2026/715, in Delegated Regulation (EU) 2026/1841 or in this Regulation, a document for which a translation is to be filed shall be deemed not to have been received by the Office in the following cases: (a) where the translation is not received by the Office within the relevant period for submitting the original document or the translation; (b) where the statement referred to in Article 17 of this Regulation is not filed within the period determined by the Office.
Articolo 17Legal authenticity of translations
In the absence of evidence or indications to the contrary, the Office shall assume that a translation corresponds to the relevant original text. In the event of doubt, the Office may require the filing, within a specific period of time, of a statement complying with Article 83(1), point (f), of Regulation (EU) 2026/715, to the effect that the translation corresponds to the original text.
Articolo 18Decisions of an Invalidity Division taken by a single member
A single member of an Invalidity Division shall take the following types of decisions pursuant to Article 144(3) of Regulation (EU) 2026/715:
(a) decisions on the apportionment of costs referred to in Article 101(1) to (4) of Regulation (EU) 2026/715;
(b) decisions to fix the amount of the costs to be paid pursuant to Article 101(6), first subparagraph of Regulation (EU) 2026/715;
(c) decisions to discontinue the proceedings or decisions confirming that there is no need to proceed to a decision on merits;
(d) decisions on the admissibility of the invalidity application pursuant to Article 6(1) of Delegated Regulation (EU) 2026/1841;
(e) decisions to stay proceedings in accordance with Article 130(2) of Regulation (EU) 2026/715;
(f) decisions to join or separate multiple invalidity proceedings referred to in Article 8 of Delegated Regulation (EU) 2026/1841.
Articolo 19Repeal and transitional provisions
1. Implementing Regulation (EU) 2026/138 is repealed.
2. Article 19(2) of Implementing Regulation (EU) 2026/138 shall continue to apply to applications for a registered EU design filed before 1 July 2026, as well as to international registrations for which the designation of the Union was made before 1 July 2026.
3. Article 19(3) of Implementing Regulation (EU) 2026/138 shall continue to apply to costs incurred in proceedings initiated before 1 July 2026.
4. Article 19(4) of Implementing Regulation (EU) 2026/138 shall continue to apply to supporting documents or translations filed before 1 July 2026.
Articolo 20Entry into force and application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .