Commission Implementing Regulation (EU) 2017/54 of 14 December 2016 concerning the authorisation of 2-methylpropan-1-ol, isopentanol, 3,7-dimethyloctan-1-ol, 2-ethylhexan-1-ol, 2-methylpropanal, 3-methylbutanal, 2-methylbutyraldehyde, 3-methylbutyric acid, 2-methylvaleric acid, 2-ethylbutyric acid, 2-methylbutyric acid, 2-methylheptanoic acid, 4-methylnonanoic acid, 4-methyloctanoic acid, isobutyl acetate, isobutyl butyrate, 3-methylbutyl hexanoate, 3-methylbutyl dodecanoate, 3-methylbutyl octanoate, 3-methylbutyl propionate, 3-methylbutyl formate, glyceryl tributyrate, isobutyl isobutyrate, isopentyl isobutyrate, isobutyl isovalerate, isopentyl 2-methylbutyrate, 2-methylbutyl isovalerate and 2-methylbutyl butyrate as feed additives for all animal species (Text with EEA relevance. )
Annex 1ANNEX
In force · version of Feb 6, 2017
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % (1) (2) (3) (4) (5) (6) (7) (8) (9) Category: Sensory additives. Functional group: Flavouring compounds 2b02001 — 2-Methylpropan-1-ol Additive composition 2-Methylpropan-1-ol Characterisation of the active substance 2-Methylpropan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 4 H 10 O CAS number 78-83-1 FLAVIS 02.001 Method of analysis ( 1 ) For the determination of 2-Methylpropan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b02003 — Isopentanol Additive composition Isopentanol Characterisation of the active substance Isopentanol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 5 H 12 O CAS number 123-51-3 FLAVIS 02.003 Method of analysis ( 1 ) For the determination of Isopentanol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b02026 — 3,7-Dimethyloctan-1-ol Additive composition 3,7-Dimethyloctan-1-ol Characterisation of the active substance 3,7-Dimethyloctan-1-ol Produced by chemical synthesis Purity: min. 90 % Chemical formula: C 10 H 22 O CAS number 106-21-8 FLAVIS 02.026 Method of analysis ( 1 ) For the identification of 3,7-Dimethyloctan-1-ol in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b02082 — 2-Ethylhexan-1-ol Additive composition 2-Ethylhexan-1-ol Characterisation of the active substance 2-Ethylhexan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 8 H 18 O CAS number 104-76-7 FLAVIS 02.082 Method of analysis ( 1 ) For the determination of 2-Ethylhexan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b05004 — 2-Methylpropanal Additive composition 2-Methylpropanal Characterisation of the active substance 2-Methylpropanal Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 4 H 8 O CAS number 78-84-2 FLAVIS 05.004 Method of analysis ( 1 ) For the determination of 2-Methylpropanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b05006 — 3-Methylbutanal Additive composition 3-Methylbutanal Characterisation of the active substance 3-Methylbutanal Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 5 H 10 O CAS number 590-86-3 FLAVIS 05.006 Method of analysis ( 1 ) For the determination of 3-Methylbutanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b05049 — 2-Methylbutyraldehyde Additive composition 2-Methylbutyraldehyde Characterisation of the active substance 2-Methylbutyraldehyde Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 5 H 10 O CAS number 96-17-3 FLAVIS 05.049 Method of analysis ( 1 ) For the determination of 2-Methylbutyraldehyde in the feed additive and in feed flavouring premixtures. Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b08008 — 3-Methylbutyric acid Additive composition 3-Methylbutyric acid Characterisation of the active substance 3-Methylbutyric acid Produced by chemical synthesis Purity: min. 99 % Chemical formula: C 5 H 10 O 2 CAS number 503-74-2 FLAVIS 08.008 Method of analysis ( 1 ) For the determination of 3-Methylbutyric acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b08031 — 2-Methylvaleric acid Additive composition 2-Methylvaleric acid Characterisation of the active substance 2-Methylvaleric acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 6 H 12 O 2 CAS number 97-61-0 FLAVIS 08.031 Method of analysis ( 1 ) For the determination of 2-Methylvaleric acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b08045 — 2-Ethylbutyric acid Additive composition 2-Ethylbutyric acid Characterisation of the active substance 2-Ethylbutyric acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 6 H 12 O 2 CAS number 88-09-5 FLAVIS 08.045 Method of analysis ( 1 ) For the determination of 2-Ethylbutyric acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b08046 — 2-Methylbutyric acid Additive composition 2-Methylbutyric acid Characterisation of the active substance 2-Methylbutyric acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 5 H 10 O 2 CAS number 116-53-0 FLAVIS 08.046 Method of analysis ( 1 ) For the determination of 2-Methylbutyric acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b08047 — 2-Methylheptanoic acid Additive composition 2-Methylheptanoic acid Characterisation of the active substance 2-Methylheptanoic acid Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 8 H 16 O 2 CAS number 1188-02-9 FLAVIS 08.047 Method of analysis ( 1 ) For the determination of 2-Methylheptanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b08062 — 4-Methylnonanoic acid Additive composition 4-Methylnonanoic acid Characterisation of the active substance 4-Methylnonanoic acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 10 H 20 O 2 CAS number 45019-28-1 FLAVIS 08.062 Method of analysis ( 1 ) For the identification of 4-Methylnonanoic acid in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b08063 — 4-Methyloctanoic acid Additive composition 4-Methyloctanoic acid Characterisation of the active substance 4-Methyloctanoic acid Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 9 H 18 O 2 CAS number 54947-74-9 FLAVIS 08.063 Method of analysis ( 1 ) For the determination of 4-Methyloctanoic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b09005 — Isobutyl acetate Additive composition Isobutyl acetate Characterisation of the active substance Isobutyl acetate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 6 H 12 O 2 CAS number 110-19-0 FLAVIS 09.005 Method of analysis ( 1 ) For the determination of Isobutyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b09043 — Isobutyl butyrate Additive composition Isobutyl butyrate Characterisation of the active substance Isobutyl butyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 8 H 16 O 2 CAS number 539-90-2 FLAVIS 09.043 Method of analysis ( 1 ) For the determination of Isobutyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09070 — 3-Methylbutyl hexanoate Additive composition 3-Methylbutyl hexanoate Characterisation of the active substance 3-Methylbutyl hexanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 11 H 22 O 2 CAS number 2198-61-0 FLAVIS 09.070 Method of analysis ( 1 ) For the identification of 3-Methylbutyl hexanoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09103 — 3-Methylbutyl dodecanoate Additive composition 3-Methylbutyl dodecanoate Characterisation of the active substance 3-Methylbutyl dodecanoate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 17 H 34 O 2 CAS number 6309-51-9 FLAVIS 09.103 Method of analysis ( 1 ) For the identification of 3-Methylbutyl dodecanoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09120 — 3-Methylbutyl octanoate Additive composition 3-Methylbutyl octanoate Characterisation of the active substance 3-Methylbutyl octanoate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 13 H 26 O 2 CAS number 2035-99-6 FLAVIS 09.120 Method of analysis ( 1 ) For the identification of 3-Methylbutyl octanoate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09136 — 3-Methylbutyl propionate Additive composition 3-Methylbutyl propionate Characterisation of the active substance 3-Methylbutyl propionate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 8 H 16 O 2 CAS number 105-68-0 FLAVIS 09.136 Method of analysis ( 1 ) For the determination of 3-Methylbutyl propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09162 — 3-Methylbutyl formate Additive composition 3-Methylbutyl formate Characterisation of the active substance 3-Methylbutyl formate Produced by chemical synthesis Purity: min. 92 % Chemical formula: C 6 H 12 O 2 CAS number 110-45-2 FLAVIS 09.162 Method of analysis ( 1 ) For the determination of 3-Methylbutyl formate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09211 — Glyceryl tributyrate Additive composition Glyceryl tributyrate Characterisation of the active substance Glyceryl tributyrate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C 15 H 26 O 6 CAS number 60-01-5 FLAVIS 09.211 Method of analysis ( 1 ) For the determination of Glyceryl tributyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09417 — Isobutyl isobutyrate Additive composition Isobutyl isobutyrate Characterisation of the active substance Isobutyl isobutyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 8 H 16 O 2 CAS number 97-85-8 FLAVIS 09.417 Method of analysis ( 1 ) For the determination of Isobutyl isobutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027 2b09419 — Isopentyl isobutyrate Additive composition Isopentyl isobutyrate Characterisation of the active substance Isopentyl isobutyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 9 H 18 O 2 CAS number 2050-01-3 FLAVIS 09.419 Method of analysis ( 1 ) For the determination of Isopentyl isobutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09472 — Isobutyl isovalerate Additive composition Isobutyl isovalerate Characterisation of the active substance Isobutyl isovalerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 9 H 18 O 2 CAS number 589-59-3 FLAVIS 09.472 Method of analysis ( 1 ) For the determination of Isobutyl isovalerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09530 — Isopentyl 2-methylbutyrate Additive composition Isopentyl 2-methylbutyrate Characterisation of the active substance Isopentyl 2-methylbutyrate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 10 H 20 O 2 CAS number 27625-35-0 FLAVIS 09.530 Method of analysis ( 1 ) For the determination of Isopentyl 2-methylbutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09531 — 2-Methylbutyl isovalerate Additive composition 2-Methylbutyl isovalerate Characterisation of the active substance 2-Methylbutyl isovalerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 10 H 20 O 2 CAS number 2445-77-4 FLAVIS 09.531 Method of analysis ( 1 ) For the determination of 2-Methylbutyl isovalerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027 2b09659 — 2-Methylbutyl butyrate Additive composition 2-Methylbutyl butyrate Characterisation of the active substance 2-Methylbutyl butyrate Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 9 H 18 O 2 CAS number 51115-64-1 FLAVIS 09.659 Method of analysis ( 1 ) For the determination of 2-Methylbutyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated. 5. Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff. 6. For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment 6 February 2027