Commission Implementing Regulation (EU) 2017/55 of 14 December 2016 concerning the authorisation of octan-2-ol, isopropanol, pentan-2-ol, octan-3-ol, heptan-2-one, pentan-2-one, 6-methyl-hepta-3,5-dien-2-one, nonan-3-one, decan-2-one and isopropyl tetradecanoate as feed additives for all animal species (Text with EEA relevance. )
Annex 1ANNEX
In force · version of Feb 6, 2017
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % (1) (2) (3) (4) (5) (6) (7) (8) (9) Category: Sensory additives. Functional group: Flavouring compounds 2b02022 — Octan-2-ol Additive composition Octan-2-ol Characterisation of the active substance Octan-2-ol Produced by chemical synthesis Purity: min 97 % C 8 H 18 O CAS No 123¬96-6 FLAVIS No:02.022 Methods of Analysis ( 1 ) For the determination of octan-2-ol in the feed additive and in feed flavouring premixtures: Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b02079 — Isopropanol Additive composition Isopropanol Characterisation of the active substance Isopropanol Produced by chemical synthesis Purity: min. 99,7 % Chemical formula: C 3 H 8 O CAS No 67-63-0 FLAVIS No: 02.079 Method of analysis ( 1 ) For the determination of isopropanol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b02088 — Pentan-2-ol Additive composition Pentan-2-ol Characterisation of the active substance Pentan-2-ol Produced by chemical synthesis Purity: min. 97,9 % Chemical formula: C 5 H 12 O CAS No 6032-29-7 FLAVIS No: 02.088 Method of analysis ( 1 ) For the determination of pentan-2-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b02098 — Octan-3-ol Additive composition Octan-3-ol Characterisation of the active substance Octan-3-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C 8 H 18 O CAS No 589-98-0 FLAVIS No:02.098 Method of analysis ( 1 ) For the determination of octan-3-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 1 mg/kg for pigs and poultry; — 1,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b07002 — Heptan-2-one Additive composition Heptan-2-one Characterisation of the active substance Heptan-2-one Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 7 H 14 O CAS No 110-43-0 FLAVIS No: 07.002 Method of analysis ( 1 ) For the determination heptan-2-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 4 mg/kg for piglets; — 3 mg/kg for chickens for fattening and laying hens; — 2 mg/kg for cats; — 5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 4 mg/kg for piglets; — 3 mg/kg for chickens for fattening and laying hens; — 2 mg/kg for cats; — 5 mg/kg for other species and categories 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b07054 — Pentan-2-one Additive composition Pentan-2-one Characterisation of the active substance Pentan-2-one Produced by chemical synthesis Purity: min. 95 % Chemical formula: C 5 H 10 O CAS No 107-87-9 FLAVIS No: 07.054 Method of analysis ( 1 ) For the determination of pentan-2-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 4 mg/kg for piglets; — 3 mg/kg for chickens for fattening and laying hens; — 2 mg/kg for cats; — 5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 4 mg/kg for piglets; — 3 mg/kg for chickens for fattening and laying hens; — 2 mg/kg for cats; — 5 mg/kg for other species and categories 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b07099 — 6-Methyl- hepta- 3,5-dien- 2-one Additive composition 6-Methyl- hepta- 3,5-dien- 2-one Characterisation of the active substance 6-Methyl- hepta- 3,5-dien- 2-one Produced by chemical synthesis Purity: min. 96 % Chemical formula: C 8 H 12 O CAS No 1604-28-0 FLAVIS No: 07.099 Method of analysis ( 1 ) For the determination of 6-methyl- hepta- 3,5-dien- 2-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 0,3 mg/kg for pigs and poultry; — 0,5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 0,3 mg/kg for pigs and poultry; — 0,5 mg/kg for other species and categories 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b07113 — Nonan- 3- one Additive composition Nonan- 3- one Characterisation of the active substance Nonan- 3- one Produced by chemical synthesis Purity: min. 95,9 % Chemical formula: C 9 H 18 O CAS No 925-78-0 FLAVIS No: 07.113 Method of analysis ( 1 ) For the determination of nonan- 3- one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: pigs and poultry: 0,3 mg/kg, for fish: 0,05 mg/kg and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 0,3 mg/kg for pigs and poultry; — 0,05 mg/kg for fish; — 0,5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 0,3 mg/kg for pigs and poultry; — 0,05 mg/kg for fish; — 0,5 mg/kg for other species and categories 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b07150 — Decan- 2 -one Additive composition Decan- 2 -one Characterisation of the active substance Decan- 2 -one Produced by chemical synthesis Purity: min. 98 % Chemical formula: C 10 H 20 O CAS No 693-54-9 FLAVIS No: 07.150 Method of analysis ( 1 ) For the determination of decan- 2 -one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 0,3 mg/kg for pigs and poultry; — 0,5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: — 0,3 mg/kg for pigs and poultry; — 0,5 mg/kg for other species and categories 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027 2b09105 — Isopropyl tetradecanoate Additive composition Isopropyl tetradecanoate Characterisation of the active substance Isopropyl tetradecanoate Produced by chemical synthesis Purity: min. 99 % Chemical formula: C 17 H 34 O 2 CAS No 110-27-0 FLAVIS No 09.105 Method of analysis ( 1 ) For the determination of isopropyl tetradecanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027