Commission Implementing Regulation (EU) 2017/373 of 1 March 2017 laying down common requirements for providers of air traffic management/air navigation services and other air traffic management network functions and their oversight, repealing Regulation (EC) No 482/2008, Implementing Regulations (EU) No 1034/2011, (EU) No 1035/2011 and (EU) 2016/1377 and amending Regulation (EU) No 677/2011 (Text with EEA relevance. )
Annex VIIANNEX VII
In force · version of Oct 4, 2026
SPECIFIC REQUIREMENTS FOR PROVIDERS OF DATA SERVICES
(Part-DAT)
SUBPART A — ADDITIONAL ORGANISATION REQUIREMENTS FOR PROVIDERS OF DATA SERVICES (DAT.OR)
SECTION 1 — GENERAL REQUIREMENTS
DAT.OR.100 Aeronautical data and information
(a) The DAT provider shall receive, assemble, translate, select, format, distribute and/or integrate aeronautical data and information that is released by an authoritative source for use in aeronautical databases on certified aircraft application/equipment. In specific cases, if aeronautical data is not provided in the aeronautical information publication (AIP) or by an authoritative source or does not meet the applicable data quality requirements (DQRs), that aeronautical data may be originated by the DAT provider itself and/or by other DAT providers. In this context, that aeronautical data shall be validated by the DAT provider originating it.
(b) When so requested by its customers, the DAT provider may process tailored data provided by the aircraft operator or originating from other DAT providers for use by that aircraft operator. The responsibility for this data and its subsequent update shall remain with the aircraft operator.
DAT.OR.105 Technical and operational competence and capability
(a) In addition to ATM/ANS.OR.B.001, the DAT provider shall: (1) perform the reception, assembly, translation, selection, formatting, distribution and/or integration of aeronautical data and information that is released by aeronautical data source provider(s) into aeronautical databases for certified aircraft application/equipment under the applicable requirements. The type 2 DAT provider shall ensure that the DQRs are compatible with the intended use of the certified aircraft application/equipment through an appropriate arrangement with the specific equipment design approval holder or an applicant for an approval of that specific design; (2) issue a statement of conformity that the aeronautical databases it has produced are produced in accordance with this Regulation and the applicable industry standards; (3) provide assistance to the equipment design approval holder in dealing with any continuing airworthiness actions that are related to the aeronautical databases that have been produced.
(b) For release of databases, the accountable manager shall nominate attesting staff identified in point DAT.TR.100(b) and allocate their responsibilities in an independent manner to attest through the statement of conformity that data meets the DQRs and processes are followed. The ultimate responsibility for the databases release statements signed by the attesting staff shall remain with the accountable manager of the DAT provider.
DAT.OR.110 Management system
In addition to point ATM/ANS.OR.B.005, the DAT provider, as applicable for the type of DAT provision, shall establish and maintain a management system that includes control procedures for:
(a) document issue, approval or change;
(b) DQRs change;
(c) verification that incoming data has been produced in accordance with the applicable standards;
(d) timely update of the data used;
(e) identification and traceability;
(f) processes for reception, assembly, translation, selection, formatting, distribution and/or integration of data into a generic database or database compatible with the specific aircraft application/equipment;
(g) data verification and validation techniques;
(h) identification of tools, including configuration management and tools qualification, as necessary;
(i) handling of errors/deficiencies;
(j) coordination with the aeronautical data source provider(s) and/or DAT provider(s), and with the equipment design approval holder or an applicant for an approval of that specific design when providing type 2 DAT services;
(k) issue of statement of conformity;
(l) controlled distribution of databases to users.
DAT.OR.115 Record-keeping
In addition to ATM/ANS.OR.B.030, the DAT provider shall include in its record-keeping system the elements indicated in DAT.OR.110.
SECTION 2 — SPECIFIC REQUIREMENTS
DAT.OR.200 Reporting requirements
(a) The DAT provider shall: (1) report to the customer and, where applicable, the equipment design approval holder all the cases where aeronautical databases have been released by the DAT provider and have been subsequently identified to have deficiencies and/or errors, thus not meeting the applicable data requirements.; (2) report to the competent authority the deficiencies and/or errors identified according to point (1), which could lead to an unsafe condition. Such reports shall be made in a form and manner acceptable to the competent authority; (3) where the certified DAT provider is acting as a supplier to another DAT provider, report also to that other organisation all the cases where it has released aeronautical databases to that organisation and have been subsequently identified to have errors; (4) report to the aeronautical data source provider instances of erroneous, inconsistent or missing data in the aeronautical source.
(b) The DAT provider shall establish and maintain an internal reporting system in the interest of safety to enable the collection and assessment of reports in order to identify adverse trends or to address deficiencies, and to extract reportable events and actions. This internal reporting system may be integrated into the management system as required in point ATM/ANS.OR.B.005.
SUBPART B — TECHNICAL REQUIREMENTS FOR PROVIDERS OF DATA SERVICES (DAT.TR)
SECTION 1 — GENERAL REQUIREMENTS
DAT.TR.100 Working methods and operating procedures
The DAT provider shall:
(a) with regard to all the necessary aeronautical data: (1) establish DQRs that are agreed upon with the other DAT provider and in the case of a type 2 DAT provider, with the equipment design approval holder or an applicant for an approval of that specific design, to determine the compatibility of these DQRs with the intended use; (2) use data from an authoritative source(s) and, if required, other aeronautical data verified and validated by the DAT provider itself and/or by other DAT provider(s); (3) establish a procedure to ensure that the data is correctly processed; (4) establish and implement processes to ensure that the tailored data provided or requested by an aircraft operator or other DAT provider shall only be distributed to the requester itself; and
(b) with regard to attesting staff that sign the statements of conformity issued under DAT.OR.105(b) ensure that: (1) the knowledge, background (including other functions in the organisation), and experience of the attesting staff are appropriate to their allocated responsibilities; (2) it maintains records of all attesting staff which include details of the scope of their authorisation; (3) attesting staff are provided with evidence of the scope of their authorisation.
DAT.TR.105 Required interfaces
The DAT provider shall ensure the necessary formal interfaces with:
(a) aeronautical data source(s) and/or other DAT providers;
(b) the equipment design approval holder for type 2 DAT provision, or an applicant for an approval of that specific design;
(c) aircraft operators, as applicable.