Preamble 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition ( 1 ) , and in particular Article 9(2) thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC ( 2 ) .
recital 2recital 2
(2) The copper compounds cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, cupric chelate of amino acids, hydrate and cupric chelate of glycine hydrate were authorised without a time limit as feed additives for all animal species by Commission Regulation (EC) No 1334/2003 ( 3 ) and Commission Regulation (EC) No 479/2006 ( 4 ) in accordance with Directive 70/524/EEC. Those substances were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.
recital 3recital 3
(3) In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, applications were submitted for the re-evaluation of cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, cupric chelate of amino acids, hydrate and cupric chelate of glycine hydrate as feed additives for all animal species. The applicants requested that those additives be classified in the additive category ‘nutritional additives’. Those applications were accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
recital 4recital 4
(4) Due to scientific considerations, the European Food Safety Authority (‘the Authority’) recommended in its opinions of 14 November 2012 ( 5 ) , 31 January 2013 ( 6 ) and 11 March 2015 ( 7 ) to replace ‘Cupric’ by ‘Copper(II)’ in order to avoid potential misunderstandings. The Authority also recommended splitting Copper(II) chelate of amino acids into the following two groups, in view of its chemical characteristics: Copper(II) chelate of amino acids hydrate and Copper(II) chelate of protein hydrolysates.
recital 5recital 5
(5) The Authority concluded that, under the proposed conditions of use, Copper(II) diacetate monohydrate, Copper(II) carbonate dihydroxy monohydrate, Copper(II) chloride dihydrate, Copper(II) oxide, Copper(II) sulphate pentahydrate, Copper(II) chelate of amino acids hydrate, Copper(II) chelate of protein hydrolysates, Copper(II) chelate of glycine hydrate (solid) and Copper(II) chelate of glycine hydrate (liquid) (‘substances concerned’) do not have an adverse effect on animal health, consumer safety and the environment. Considering the capacities to be respiratory, eye and skin irritants, appropriate protective measures should be taken with respect to the handling of the additives concerned and premixtures containing them, in order to avoid that safety concerns for the users would arise.
recital 6recital 6
(6) With respect to the nickel content of the additives, in particular in Copper(II) sulphate pentahydrate, certain batches of the additive might qualify for requirements set out in Regulation (EC) No 1907/2006 of the European Parliament and of the Council ( 8 ) . The feed business operator placing on the market such additives should comply with the relevant requirements. The Authority further concluded that the ‘substances concerned’ are efficacious in meeting animal copper requirements. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the reports on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
recital 7recital 7
(7) The assessment of the ‘substances concerned’ shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. However, the authority has concerns with respect to the strict adherence to the maximum quantity of copper administered to the animal if copper is added to water for drinking. Accordingly, the use of the substances concerned should be authorised as specified in the Annex to this Regulation and their use via water for drinking should be prohibited.
recital 8recital 8
(8) With respect to the potential impacts on the environment, the Authority was requested to deliver a scientific opinion for a revision of the currently authorised maximum copper content in complete feed. The Authority recommended in its opinion of 13 July 2016 ( 9 ) to amend the authorised maximum copper contents in complete feed for different target species. These new levels should be adopted. However, for piglets the drastic recommended decrease to 25 mg/kg directly after weaning should not be done in one step, in order not to put at risk meeting the physiological needs of animals, particularly in that sensitive period, and to avoid any other negative impacts on the health of piglets. With the objective of a further reduction when the maximum contents are next reviewed to meet the maximum of 25 mg/kg for piglets directly after weaning, feed business operators and research institutes should be encouraged to collect new scientific data about the impacts of the levels recommended by the Authority on the health and welfare status of piglets and to promptly explore the use and effectiveness of alternatives to supplementation with copper as mentioned by the Authority.
recital 9recital 9
(9) As a result of the granting of new authorisations for cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, cupric chelate of amino acids, hydrate and cupric chelate of glycine hydrate, the complete entries for these substances in Regulations (EC) No 1334/2003 and (EC) No 479/2006 should be deleted. The authorisation for copperlysine sulphate expired on 31 March 2004. For reasons of legal certainty, it is appropriate to delete the entry concerning that substance from Regulation (EC) No 1334/2003.
recital 10recital 10
(10) Commission Regulation (EU) No 349/2010 ( 10 ) and Commission Implementing Regulations (EU) No 269/2012 ( 11 ) , (EU) No 1230/2014 ( 12 ) and (EU) 2016/2261 ( 13 ) authorised several copper compounds as nutritional feed additives. In order to take into account the conclusions of the Authority in its opinion of 13 July 2016, which were also the scientific basis for the provisions concerning the total copper content in compound feed for the additives authorised by this Regulation and which are mainly referring to the environmental impact of feed supplementation with copper, it is appropriate to align the maximum contents of copper in Regulation (EU) No 349/2010 and Implementing Regulations (EU) No 269/2012, (EU) No 1230/2014 and (EU) 2016/2261 with the provisions of this Regulation as regards the copper content in compound feed. Regulation (EU) No 349/2010 and Implementing Regulations (EU) No 269/2012, (EU) No 1230/2014 and (EU) 2016/2261 should therefore be amended accordingly.
recital 11recital 11
(11) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, cupric chelate of amino acids, hydrate and cupric chelate of glycine hydrate and the copper compounds authorised by Regulation (EU) No 349/2010 and Implementing Regulations (EU) No 269/2012, (EU) No 1230/2014 and (EU) 2016/2261, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.
recital 12recital 12
(12) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
Article 1
Authorisation
The substances specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, are authorised as feed additives in animal nutrition, subject to the conditions laid down in that Annex.
Article 2
Special conditions of use
The authorised substances specified in the Annex as additives belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’ shall not be used in water for drinking.
Article 3
Amendment to Regulation (EC) No 1334/2003
In the Annex to Regulation (EC) No 1334/2003, the following additives are deleted from entry E4 for the element Copper-Cu: ‘cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, copperlysine sulphate and cupric chelate of amino acids, hydrate’.
Article 4
Amendment to Regulation (EC) No 479/2006
In the Annex to Regulation (EC) No 479/2006, the entry E4 for the additive ‘Cupric chelate of glycine hydrate’ is deleted.
Article 5
Amendment to Regulation (EU) No 349/2010
In the Annex to Regulation (EU) No 349/2010, in the line 3b4.10 the text of the eighth column is replaced by the following:
‘Bovines:
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
Crustaceans: 50 (total).
Other animals: 25 (total)’.
Article 6
Amendment to Implementing Regulation (EU) No 269/2012
In the Annex to Implementing Regulation (EU) No 269/2012, in the line 3b409 the text of the eighth column is replaced by the following:
‘Bovines:
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
Crustaceans: 50 (total).
Other animals: 25 (total)’.
Article 7
Amendment to Implementing Regulation (EU) No 1230/2014
In the Annex to Implementing Regulation (EU) No 1230/2014, in the line 3b411 the text of the eighth column is replaced by the following:
‘Bovines:
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
Crustaceans: 50 (total).
Other animals: 25 (total’.
Article 8
Amendment to Implementing Regulation (EU) 2016/2261
In the Annex to Implementing Regulation (EU) 2016/2261, in the line 3b412 the text of the eighth column is replaced by the following:
‘Bovines:
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
Crustaceans: 50 (total).
Other animals: 25 (total’.
Article 9
Transitional measures
Article 10
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Annex 1ANNEX
Identification number of the additive
Name of the holder of authorisation
Additive
Composition, chemical formula, description, analytical method
Species or category of animal
Maximum age
Minimum content
Maximum content
Other provisions
End of period of authorisation
Content of element (Cu) in mg/kg of complete feed with a moisture content of 12 %
Category of nutritional additives. Functional group: compounds of trace elements
3b401
—
Copper(II) diacetate monohydrate
Additive composition
Copper(II) diacetate monohydrate as a powder with a minimum content of 31 % copper
Characterisation of the active substance
Chemical formula: Cu(CH 3 COO) 2 · H 2 O
CAS Number: 6046-93-1
Analytical methods ( 1 )
For the identification of Copper(II) diacetate monohydrate in the feed additive:
— European Pharmacopoeia Monographs 2146 and 20301
For the crystallographic characterisation of the feed additive:
— X-Ray diffraction
For the determination of total Cu content in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
Determination of total Cu content in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Commission Regulation (EC) No 152/2009 ( 2 ) , Annex IV-C) or
— inductively coupled plasma atomic emission, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b402
—
Copper(II) carbonate dihydroxy monohydrate
Additive composition
Copper(II) carbonate dihydroxy monohydrate as a powder with a minimum content of 52 % copper
Characterisation of the active substance
Chemical formula: CuCO 3 · Cu(OH) 2 · H 2 O
CAS Number: 100742-53-8
Analytical methods ( 1 )
For the identification of carbonate in the feed additive:
— European Pharmacopoeia Monograph 20301
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b403
—
Copper(II) chloride dihydrate
Additive composition
Copper(II) chloride dihydrate as a powder with a minimum content of 36 % copper
Characterisation of the active substance
Chemical formula: CuCl 2 · 2H 2 O
CAS Number: 10125-13-0
Analytical methods ( 1 )
For the identification of chloride in the feed additive:
— European Pharmacopoeia Monograph 20301
For the crystallographic characterisation of the feed additive:
— X-Ray diffraction
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b404
—
Copper(II) oxide
Additive composition
Copper(II) oxide as a powder with a minimum content of 77 % copper
Characterisation of the active substance
Chemical formula: CuO
CAS Number: 1317-38-0
Analytical methods ( 1 )
For the crystallographic characterisation of the feed additive:
— X-Ray diffraction
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b405
—
Copper(II) sulphate pentahydrate
Additive composition
Copper(II) sulphate pentahydrate as a powder with a minimum content of 24 % copper
Characterisation of the active substance
Chemical formula: CuSO 4 · 5H 2 O
CAS Number: 7758-99-8
Analytical methods ( 1 )
For the identification of Copper(II) sulphate pentahydrate in the feed additive:
— European Pharmacopoeia Monographs 0894 and 20301
For the crystallographic characterisation of the feed additive:
— X-Ray diffraction
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. Copper(II) sulphate pentahydrate may be placed on the market and used as an additive consisting of a preparation.
2. The additive shall be incorporated into feed in the form of a premixture.
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
4. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b406
—
Copper (II) chelate of amino acids hydrate
Additive composition
Preparation of copper(II) amino acid complex where the copper and the amino acids derived from soya protein are chelated via coordinate covalent bonds, as a powder with a minimum content of 10 % copper
All animal species
—
—
Bovines before the start of rumination: 15 (total);
Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5 th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. The following words shall be included in the labelling:
— For feed for ovines, if the level of copper in the feed exceeds 10 mg/kg: ‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination, if the level of copper in the feed is less than 20 mg/kg: ‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
13 August 2028
Characterisation of the active substance
Chemical formula: Cu(x) 1–3 · nH 2 O, x = anion of any amino acid from soya protein hydrolysate.
Maximum 10 % of molecules exceeding 1 500 Da.
Analytical methods ( 1 )
For the quantification of amino acid content in the feed additive:
— ion exchange chromatography with post-column derivatisation and optical detection (IEC-VIS/FLD)
For the quantification of total copper in the feed additive:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (ISO 6869)
atomic absorption spectrometry, AAS
For the quantification of total copper in premixtures:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (ISO 6869) or
— inductively coupled plasma-mass spectrometry, ICP-MS (EN 17053)
For the quantification of total copper in feed materials and compound feed:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (Commission Regulation (EC) No 152/2009 (Annex IV-C) or ISO 6869) or
— inductively coupled plasma-mass spectrometry, ICP-MS (EN 17053)
3b406i
—
Copper (II) chelate of amino acids hydrate
Additive composition
Preparation of copper (II) amino acid complex, where the copper and the amino acids are chelated via coordinate covalent bonds, as a powder with a content of 10-11 % copper and a minimum of 18 % free amino acids.
All animal species
—
—
Bovines before the start of rumination: 15 (total);
Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
suckling and weaned up to 4 weeks after weaning: 150 (total).
from 5th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. The following words shall be included in the labelling:
— For feed for ovines, if the level of copper in the feed exceeds 10 mg/kg: ‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination, if the level of copper in the feed is less than 20 mg/kg: ‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment including skin, eye and breathing protection.
4. For additives produced from hydrolysis of animal protein, the animal origin ( avian species ) shall be indicated on the label of the additive and premixtures.
13 August 2028
Characterisation of the active substance
Chemical formula: Cu(x) 1-3 •nH 2 O, where x is equal to any amino acid coming from hydrolysed protein sources from feathers or plants;
Maximum 10 % of molecules exceeding 1 500 Da.
Analytical methods ( 1 )
For the quantification of amino acid content in the feed additive:
— ion exchange chromatography with post-column derivatisation and optical detection (IEC-VIS/FLD), Commission Regulation 152/2009 (Annex III,F) and EN ISO 17180
For the quantification of total copper in the feed additive:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (ISO 6869)
For the quantification of total copper in premixtures:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (ISO 6869) or
— inductively coupled plasma-mass spectrometry, ICP-MS (EN 17053)
For the quantification of total copper in feed materials and compound feed:
— inductively coupled plasma-atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or
— atomic absorption spectrometry, AAS (Commission Regulation (EC) No 152/2009 (Annex IV-C) or ISO 6869) or
— inductively coupled plasma-mass spectrometry, ICP-MS (EN 17053)
3b407
—
Copper(II) chelate of protein hydrolysates
Additive composition
Copper(II) chelate of protein hydrolysates as a powder with a minimum content of 10 % copper and a minimum of 50 % copper chelated
Characterisation of the active substance
Chemical formula: Cu(x) 1–3 · nH 2 O, x = anion of any amino acid from soya protein hydrolysate
Analytical methods ( 1 )
For the quantification of protein hydrolysates content in the feed additive:
— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)
For the qualitative verification of the chelation of the copper in the feed additive:
— Fourier Transformed Infrared (FTIR) spectroscopy followed by multivariate regression methods
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b413
—
Copper(II) chelate of glycine hydrate (solid)
Additive composition
Copper(II) chelate of glycine, hydrate, as a powder with a minimum content of 15 % copper and a maximum of 13 % moisture
Characterisation of the active substance
Chemical formula: Cu(x) 1-3 · nH 2 O, x = anion of glycine
Analytical methods ( 1 )
For the quantification of the glycine content in the feed additive:
— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
All animal species
—
—
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. The additive shall be incorporated into feed in the form of a premixture.
2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
3b414
—
Copper(II) chelate of glycine hydrate (liquid)
Additive composition
Copper(II) chelate of glycine, hydrate, as a liquid with a minimum content of 6 % copper
Characterisation of the active substance
Chemical formula: Cu(x) 1-3 · nH 2 O, x = anion of glycine
Analytical methods ( 1 )
For the quantification of the glycine content in the feed additive:
— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)
For the determination of total Cu in the feed additive and premixtures:
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
For the determination of total Cu in feed materials and compound feed:
— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).
Ovines: 15 (total).
Caprines: 35 (total)
Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1. Copper(II) chelate of glycine hydrate (liquid) may be placed on the market and used as an additive consisting of a preparation.
2. The additive shall be incorporated into feed in the form of a premixture.
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
4. The following words shall be included in the labelling:
— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
13 August 2028
Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports
Commission Regulation (EC) No 152/2009 of 27 January 2009 laying down the methods of sampling and analysis for the official control of feed (OJ L 54, 26.2.2009, p. 1).