Commission Implementing Regulation (EU) 2019/34 of 17 October 2018 laying down rules for the application of Regulation (EU) No 1308/2013 of the European Parliament and of the Council as regards applications for protection of designations of origin, geographical indications and traditional terms in the wine sector, the objection procedure, amendments to product specifications, the register of protected names, cancellation of protection and use of symbols, and of Regulation (EU) No 1306/2013 of the European Parliament and of the Council as regards an appropriate system of checks
Article 15Authorities responsible for verifying compliance with the product specification
In force · version of Jan 18, 2025
1. When performing the checks provided for in this Section, the responsible competent authorities and delegated bodies shall comply with the requirements laid down in Regulation (EU) 2017/625 of the European Parliament and of the Council ( 1 ).
2. In respect of protected designations of origin and protected geographical indications relating to a geographical area in a third country, annual verification of compliance with the product specification, during the production phase and during or after conditioning of the wine, shall be performed by: (a) one or more public authorities designated by the third country; or (b) one or more certification bodies.
3. The delegated bodies referred to in Article 116a(3) of Regulation (EU) No 1308/2013 and the one or more certification bodies referred to in paragraph 2, point (b), of this Article shall comply with, and be accredited in accordance with, either of the following standards as relevant for the delegated tasks: (a) Standard EN ISO/IEC 17065 “Conformity assessment – Requirements for bodies certifying products, processes and services”; (b) Standard EN ISO/IEC 17020 “Conformity assessment – Requirements for the operation of various types of bodies performing inspection”.
4. Where the authority referred to in Article 116a(2) of Regulation (EU) No 1308/2013 and the one or more authorities referred to in paragraph 2, point (a), of this Article verify compliance with the product specification, they shall offer adequate guarantees of objectivity and impartiality, and have at their disposal the qualified staff and resources needed to carry out their tasks.
5. Member States shall be authorised to impose a fee on operators subject to the controls in order to cover the costs incurred for the establishment and operation of the control system.