Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance.)
Article 24Calculation of emissions under the standard methodology
In force · version of May 27, 2025
1. Under the standard methodology, the operator shall calculate combustion emissions of each source stream by multiplying the activity data related to the amount of fuel combusted, expressed as terajoules based on net calorific value (NCV), by the corresponding emission factor, expressed as tonnes of CO 2 per terajoule (t CO 2 /TJ) consistent with the use of NCV, and the corresponding oxidation factor.
1a. For the purpose of reporting memo-items, the operator shall also calculate for each source stream combusted and for fuels used as process input the following parameters which are defined by these calculations: (i) the total preliminary emissions shall be calculated by multiplying the activity data related to the amount of fuel combusted, expressed as tonnes or normal cubic metres, by the corresponding preliminary emission factor and the corresponding oxidation factor; (ii) biomass emissions shall be calculated by multiplying the total preliminary emissions by the biomass fraction; (iii) zero-rated biomass emissions shall be calculated by multiplying the total preliminary emissions by the zero-rated biomass fraction; (iv) emissions from RFNBO, RCF or synthetic low-carbon fuels shall be calculated by multiplying the total preliminary emissions by the RFNBO or RCF fraction or the synthetic low-carbon fraction; (v) emissions from zero-rated RFNBO, RCF or synthetic low-carbon fuels shall be calculated by multiplying the total preliminary emissions by the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction.
2. The operator shall determine process emissions per source stream by multiplying the activity data related to the material consumption, throughput or production output, expressed in tonnes or normal cubic metres, by the corresponding emission factor, expressed in t CO 2 /t or t CO 2 /Nm 3 , and the corresponding conversion factor.
2a. For the purpose of reporting memo-items, the operator shall also calculate for each source stream relating to process emissions the following parameters which are defined by these calculations: (i) The total preliminary emissions shall be calculated by multiplying the activity data related to the material consumption, throughput or production output, expressed in tonnes or normal cubic metres, by the corresponding emission factor, expressed in t CO 2 /t or t CO 2 /Nm 3 , and the corresponding conversion factor; (ii) Biomass emissions shall be calculated by multiplying the total preliminary emissions by the relevant biomass fraction; (iii) Zero-rated biomass emissions shall be calculated by multiplying the total preliminary emissions by the relevant zero-rated biomass fraction.
3. Where a tier 1 or tier 2 emission factor already includes the effect of incomplete chemical reactions, the oxidation factor or conversion factor shall be set to 1.