Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance.)
Article 53Monitoring methodology for emissions from aviation activities
In force · version of May 27, 2025
1. Each aircraft operator shall determine the annual CO 2 emissions from aviation activities by multiplying the annual consumption of each neat fuel (expressed in tonnes) by the respective emission factor.
For mixed aviation fuels, the aircraft operator shall determine the theoretical amount of each neat fuel from the total amount of that mixed aviation fuel and relevant composition data by applying the following:
(i) where a fuel contains biomass, the aircraft operator shall determine the biomass fraction in accordance with Article 54;
(ii) where a fuel contains an RFNBO, RCF or synthetic low-carbon fuel, the aircraft operator shall determine the RFNBO or RCF fraction or the synthetic low-carbon fraction in accordance with Article 54b;
(iii) where the RFNBO or RCF fraction or synthetic low-carbon fraction is not zero and where the aircraft operator wants to make use of zero-rating, the aircraft operator shall determine the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction in accordance with Article 54c;
(iv) where the zero-rated biomass fraction, the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction are not zero, the aircraft operator shall calculate the zero-rated fraction as the sum of zero-rated biomass fraction, zero-rated RFNBO or RCF fraction and zero-rated synthetic low-carbon fraction. The fossil fraction is the sum of all non-zero-rated fractions.
(v) the aircraft operator shall calculate the amount of each neat fuel as total amount of the mixed aviation fuel multiplied by the relevant fraction.
For the purpose of point (iv) of this paragraph, where the aircraft operator does not calculate the zero-rated fraction, the fossil fraction shall be 100 %.
1a. By way of derogation from paragraph 1, for the purpose of assessing emissions thresholds set out in Articles 55(1) and 55(2) of this Regulation, in Article 28a(4) of Directive 2003/87/EC and in the entry ‘Aviation’ of the table in Annex I to Directive 2003/87/EC, the aircraft operator shall determine the CO 2 emissions by multiplying the annual consumption of each fuel by its preliminary emissions factor.
1b. For the purpose of reporting pursuant to Article 3 of Commission Delegated Regulation (EU) 2019/1603 ( 7 ), the aircraft operator shall determine and report the emissions which result from multiplying the annual consumption of each fuel by its preliminary emission factor.
2. Each aircraft operator shall determine the fuel consumption for each flight and for each fuel, including fuel consumed by the auxiliary power unit. For that purpose, the aircraft operator shall use one of the methods laid down in section 1 of Annex III. The aircraft operator shall choose the method that provides for the most complete and timely data combined with the lowest uncertainty without incurring unreasonable costs.
3. Each aircraft operator shall determine the fuel uplift referred to in section 1 of Annex III based on one of the following: (a) the measurement by the fuel supplier, as documented in the fuel delivery notes or invoices for each flight; (b) data from aircraft onboard measurement systems recorded in the mass and balance documentation, in the aircraft technical log or transmitted electronically from the aircraft to the aircraft operator.
4. The aircraft operator shall determine fuel contained in the tank using data from aircraft onboard measurement systems and recorded in the mass and balance documentation, in the aircraft technical log or transmitted electronically from the aircraft to the aircraft operator.
5. Where the amount of fuel uplift or the amount of fuel remaining in the tanks is determined in units of volume, expressed in litres, the aircraft operator shall convert that amount from volume to mass by using density values. The aircraft operator shall use the fuel density (which may be an actual or a standard value of 0,8 kg per litre) that is used for operational and safety reasons.
The procedure for informing the use of actual or standard density shall be described in the monitoring plan along with a reference to the relevant aircraft operator documentation.
6. For the purposes of the calculation referred to in paragraph 1, the aircraft operator shall use the default emission factors set out in table 1 in Annex III.
The aircraft operators shall use the default emissions factors set out in Table 1 in Annex III as the preliminary emission factor.
For alternative aviation fuels other than biofuels, RFNBO, RCF or synthetic low-carbon fuels, the aircraft operator shall determine the emission factor in accordance with Article 32 of this Regulation. For such fuels, the net calorific value shall be determined and reported as a memo-item.
7. By way of derogation from paragraph 6, the aircraft operator may, upon approval by the competent authority, derive the emission factor or the carbon content, on which it is based, or the net calorific value for commercially traded fuels from the purchasing records for the fuel in question, as provided by the fuel supplier, provided that those have been derived on the basis of internationally accepted standards and the emission factors listed in table 1 of Annex III cannot be applied.