Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance.)
Article 56aCalculation of CO 2 equivalent for non-CO 2 aviation effects
In force · version of May 27, 2025
1. Each aircraft operator shall monitor the non-CO 2 aviation effects from its activities performed by aeroplanes equipped with jet engines in CO 2 equivalent (CO 2 (e)) per flight.
2. The aircraft operator shall calculate the CO 2 (e) per flight using the GWP metric, in particular GWP 20 , GWP 50 and GWP 100 , resulting in CO 2 (e) values for three-time horizons (20, 50, and 100 years) for each of the monitored flights.
3. The aircraft operator shall use efficacy as defined in this Regulation and in NEATS, to refine the GWP as referred to in paragraph 2 for calculating the CO 2 (e) per flight unless the aircraft operator provides evidence to the competent authority that it is not possible to use efficacy.
4. To calculate CO 2 (e) per flight each aircraft operator shall apply a CO 2 (e) calculation approach covering the following elements: (a) the fuel-burn module and emissions-estimation module, as described in Annex IIIa, Section 3; (b) Method C consisting of a weather-based approach and Method D consisting of a location-based simplified approach, as referred to in Annex IIIa, Section 4; (c) a default values approach, used in case of data gaps, described in Annex IIIa, Section 5 and Annex IIIb. Method C and method D shall be based on input data from the modules referred to in point (a) of this paragraph, data from the aircraft operator and relevant weather data from the aircraft operator or third party-sources.
5. Each aircraft operator shall use Method C to calculate CO 2 (e) per flight.
6. By way of derogation from paragraph 5, small emitters, as defined in Article 55(1), may use Method D.
7. To apply the CO 2 (e) calculation models to their flights, aircraft operators shall meet all the following conditions, either using NEATS, pursuant to Annex IIIa, Section 2, own and third-party IT tools, or a combination of NEATS and these tools: (a) these tools comply with the requirements laid down in Annex IIIa, with regard to emission-estimation module in Section 3, 4 and 5 of that Annex; (b) where enhanced weather data is needed as defined in Annex IIIa, these tools use the same common reference Numerical Weather Prediction (NWP) model and weather data, as the one provided through NEATS; (c) these tools allow for and facilitate, for the purpose of verification, access to the monitored data in accordance with Annex IIIa, Section 4; (d) these tools ensure the data monitored is securely stored for at least 2 years, with backup and recovery functions; (e) these tools comply with the principles established by Article 75(1).
8. Where an aircraft operator plans to use tools referred to in paragraph 7, other than the fuel burn module, the aircraft operator shall first submit the technical specifications of the tools to the Commission. The Commission shall assess the specifications of the tools and, where these tools comply with the requirements in this Regulation, shall approve the tools. Once approved, the tools technical specifications and workflow shall be further described by the aircraft operator in the monitoring plan.