Commission Implementing Regulation (EU) 2018/2067 of 19 December 2018 on the verification of data and on the accreditation of verifiers pursuant to Directive 2003/87/EC of the European Parliament and of the Council (Text with EEA relevance.)
Article 16Data verification
In force · version of Jun 22, 2025
1. The verifier shall verify the data in the operator's or aircraft operator's report by applying detailed testing of the data, including by tracing the data back to the primary data source, cross-checking data with external data sources, performing reconciliations, checking thresholds regarding appropriate data and carrying out recalculations.
2. As part of the data verification referred to in paragraph 1 and taking into account the approved monitoring plan, monitoring methodology plan or the climate-neutrality plan, as appropriate, including the procedures described in that plan, the verifier shall check: (a) for the purposes of verifying an operator's emission report, the boundaries of an installation; (b) for the purposes of verifying an operator’s baseline data report, new entrant data report or annual activity level report, the boundaries of an installation and its sub-installations; (c) for the purposes of verifying an operator’s emission report, baseline data report, new entrant data report or annual activity level report, the completeness of source streams and emission sources as described in the monitoring plan approved by the competent authority or monitoring methodology plan, as appropriate; (ca) for the purposes of verifying a climate-neutrality report, the consistency with the boundaries of the installation set out in Implementing Regulation (EU) 2018/2066 and its sub-installations set out in Delegated Regulation (EU) 2019/331; (d) for the purposes of verifying an aircraft operator’s emission report or non-CO 2 aviation effects report, the completeness of flights covered by an aviation activity listed in Annex I to Directive 2003/87/EC for which the aircraft operator is responsible as well as the completeness of emission data or non-CO 2 aviation effects; (e) for the purposes of verifying an aircraft operator’s emission report, the consistency between reported data and mass and balance documentation; (f) for the purposes of verifying an aircraft operator's emission report, the consistency between aggregated fuel consumption and data on fuel purchased or otherwise supplied to the aircraft performing the aviation activity; (fa) for the purposes of verifying an annual activity level report, the accuracy of the parameters listed in Article 16(5), Articles 19, 20 or 21 of Delegated Regulation (EU) 2019/331 as well as data required under Article 6(1), (2) and (4) of Implementing Regulation (EU) 2019/1842; (fb) for the purposes of verifying a climate-neutrality report, whether the historical emissions, emission levels as well as the activity levels are consistent with data included in the baseline data reports and the activity level reports; (g) the consistency of the aggregated reported data in an operator's or aircraft operator's report with primary source data; (h) where an operator applies a measurement-based methodology referred to in Article 21(1) of Implementing Regulation (EU) 2018/2066, the measured values using the results of the calculations performed by the operator in accordance with Article 46 of that Implementing Regulation; (ha) for the purpose of assessing the information in the operator’s or aircraft operator’s report pursuant to Annex Xa to Implementing Regulation (EU) 2018/2066, the consistency between that information and the operator’s or aircraft operator’s evidence, including fuel invoices, delivery notes and contracts with fuel suppliers; (i) the reliability and accuracy of the data.
2a. Where the aircraft operator provides data on flight trajectories in the non-CO 2 aviation effects report, the verifier shall check the completeness of flight trajectory information as part of the data verification referred to in paragraph 1 and taking into account the approved monitoring plan.
2b. Where the aircraft operator provides data on aircraft properties in the non-CO 2 aviation effects report, the verifier shall at least check as part of the data verification referred to in paragraph 1 and taking into account the approved monitoring plan: (a) the consistency between the aircraft types listed in the approved monitoring plan with reported data on aircraft types and those recorded in internal records; (b) the consistency between aircraft operator’s data sources and procedures on aircraft engines with the aircraft engine unique identifier number listed in the International Civil Aviation Organization (ICAO) engine emissions databank or equivalent data source that is used to identify engines attached to the aircraft; (c) the consistency between the aircraft mass, take-off mass or load factor in the aircraft operator’s internal records and mass and balance documentation with the data reported by the aircraft operator.
The verifier shall also use the aircraft performance simulation base of aircraft data to estimate the aircraft mass, take-off mass or load factor in order to compare to the data provided by the aircraft operator.
2c. Where the aircraft operator provides data on aircraft performance in the non-CO 2 aviation effects report, the verifier shall, as part of the data verification referred to in paragraph 1 and taking into account the approved monitoring plan, check the following: (a) the consistency between flight trajectory data and aircraft performance data along its trajectory, including cross checking the time stamps used for flight trajectory data and aircraft performance data; (b) the consistency between aggregated fuel consumption, data on fuel purchased or otherwise supplied to the aircraft performing the aviation activity and tank measurements; (c) the consistency between the data reported by the aircraft operator and manufacturer’s specifications, internal records and procedures related to the fuel delivered, fuel flow and aircraft engine efficiency, including the thrust of the aircraft engine; (d) any information that the verifier deems necessary to reduce the verification risk to an acceptable level to obtain reasonable assurance that the non-CO 2 aviation effects report is free from material misstatement.
When checking the consistency of data referred in point (a), the verifier shall also use the aircraft performance simulation base of aircraft data to estimate the fuel flow measurements and the engine efficiency in order to compare to the data provided by the aircraft operator.
2d. Where the aircraft operator uses its own method to determine fuel properties or weather data in the non-CO 2 aviation effects report, its own fuel burn module or emission estimation module referred to in Article 56a(4), point (a), of Implementing Regulation (EU) 2018/2066, the verifier shall check as part of the data verification referred to in paragraph 1, the validity of the input information used to determine the data and apply the methods as approved by the competent authority in the monitoring plan.
3. For the purposes of checking the completeness of flights referred to in point (d) of paragraph 2, the verifier shall use an aircraft operator's air traffic data, including data collected from Eurocontrol or other relevant organisations which can process air traffic information such as that available to Eurocontrol.
4. For the purposes of checking the completeness of flight trajectories referred to in paragraph 2a, the verifier shall use Eurocontrol’s Current Tactical Flight Model, Eurocontrol’s Regulated Tactical Flight Model, or alternatively, the Eurocontrol’s Filed Tactical Flight Model or equivalent in terms of data accuracy, where appropriate, as well as Automatic Dependent Surveillance–Broadcast data.