Preamble 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition ( 1 ) , and in particular Article 9(2) thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting and renewing such authorisation.
recital 2recital 2
(2) The preparation of copper chelate of hydroxy analogue of methionine was authorised for a period of 10 years as a feed additive for all animal species by Commission Regulation (EU) No 349/2010 ( 2 ) .
recital 3recital 3
(3) In accordance with Article 14(1) of Regulation (EC) No 1831/2003, an application was submitted for the renewal of the authorisation of copper chelate of hydroxy analogue of methionine as a feed additive for all animal species, requesting the additive to be classified in the additive category ‘nutritional additives’ and in the functional group ‘compounds of trace elements’. The application included a proposal for amending the conditions of the current authorisation, consisting of the removal of the mineral oil from the additive, which is therefore to be considered as a substance and no longer a preparation. In addition, the minimum content of copper in the additive has been slightly modified. That application was accompanied by the particulars and documents required under Article 14(2) of that Regulation.
recital 4recital 4
(4) The European Food Safety Authority (‘the Authority’) concluded in its opinion of 5 May 2021 ( 3 ) that the applicant has provided evidence that the additive, in its new composition, remains safe for all animal species, the consumers and the environment under the conditions of use currently authorised. It also concluded that the additive is considered as a skin and eye irritant and a skin sensitiser, while the risk of respiratory sensitisation is considered low. The Authority stated that the proposed modification of the conditions of the original authorisation does not have an impact on the efficacy of the additive. Finally, it did not consider that there is a need for specific requirements of post-market monitoring.
recital 5recital 5
(5) In accordance with Article 5(4), point (c), of Commission Regulation (EC) No 378/2005 ( 4 ) , the Reference Laboratory set up by Regulation (EC) No 1831/2003 considered that the conclusions and recommendations reached in the previous assessment are valid and applicable for the current application.
recital 6recital 6
(6) The assessment of copper chelate of hydroxy analogue of methionine shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the authorisation of that additive should be renewed. In addition, the Commission considers that appropriate protective measures should be taken to prevent adverse effects on the health of the users of the additive.
recital 7recital 7
(7) As a consequence of the renewal of the authorisation of copper chelate of hydroxy analogue of methionine as a feed additive, Regulation (EU) No 349/2010 should be repealed.
recital 8recital 8
(8) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation of copper chelate of hydroxy analogue of methionine, it is appropriate to provide for a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the renewal of the authorisation, with regard to the composition of the additive, which now consists of a substance, and the derived modification of the identification number of the additive.
recital 9recital 9
(9) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
Article 1Renewal of the authorisation
The authorisation of the substance specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, is renewed subject to the conditions laid down in that Annex.
Article 2Repeal
Regulation (EU) No 349/2010 is repealed.
Article 3Transitional measures
1. The additive specified in the Annex and premixtures containing that additive, which are produced and labelled before 20 January 2024 in accordance with the rules applicable before 20 July 2023 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the additive specified in the Annex, which are produced and labelled before 20 July 2024 in accordance with the rules applicable before 20 July 2023 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the additive specified in the Annex, which are produced and labelled before 20 July 2025 in accordance with the rules applicable before 20 July 2023 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food producing animals.
Article 4Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Annex 1ANNEX
Identification number of the additive Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation Content of the element (Cu) in mg/kg of complete feed with a moisture content of 12 % Category of nutritional additives. Functional group: compounds of trace elements 3b410i Copper chelate of hydroxy analogue of methionine Additive composition Copper chelate of hydroxy analogue of methionine containing a minimum of 16 % copper and a minimum of 78 % (2-hydroxy-4-methylthio) butanoic acid Maximum content of nickel: 20 ppm. Solid form All animal species - - Bovines: — Bovines before the start of rumination: 15 (total); — Other bovines: 30 (total). Ovines: 15 (total). Caprines: 35 (total) Piglets: — Suckling and weaned up to 4 weeks after weaning: 150 (total); — From 5-th week after weaning up to 8 weeks after weaning: 100 (total). Crustaceans: 50 (total). Other animals: 25 (total). 1. The additive shall be incorporated into feed in the form of a premixture. 2. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing, eye and skin protective equipment. 3. The following words shall be included in the labelling: — for feed for sheep if the level of copper in the feed exceeds 10 mg/kg: ‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’ — of feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg: ‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’ 20 July 2033 Characterisation of the active substances Chemical formula: copper bis(-2-hydroxy-4-methylthio)butanoate: Cu(CH 3 S(CH 2 ) 2 -CH(OH)-COO) 2 CAS: 292140-30-8 Analytical methods ( 1 ) For the quantification of the hydroxy analogue of methionine content in the feed additive: titrimetry, potentiometric titration after oxidation reduction reaction. For the quantification of total copper in the feed additive: — Inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or — Atomic absorption spectrometry, AAS (ISO 6869) For the quantification of total copper in premixtures: — Inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or — Atomic absorption spectrometry, AAS (ISO 6869) or — Inductively coupled plasma mass spectrometry, ICP-MS (EN 17053). For the quantification of total copper in compound feed: — Inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or EN 15621) or — Atomic absorption spectrometry, AAS (Commission Regulation (EC) No 152/2009 (Annex IV-C) or ISO 6869) or — Inductively coupled plasma mass spectrometry, ICP-MS (EN 17053).