Commission Implementing Regulation (EU) 2023/1773 of 17 August 2023 laying down the rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards reporting obligations for the purposes of the carbon border adjustment mechanism during the transitional period (Text with EEA relevance)
Annex IVANNEX IV
In force · version of Oct 31, 2024
Content of the recommended communication from operators of installations to reporting declarants
1. CONTENT OF THE EMISSIONS DATA COMMUNICATION TEMPLATE
General information
1. Information on the installation:
(a) the name and contact details of the operator;
(b) the name of the installation;
(c) contact details for the installation;
(d) the unique installation identifier, if available;
(e) the applicable United Nations Code for Trade and Transport Location (UN/LOCODE) of the location;
(f) an exact address and its English transcript;
(g) geographical coordinates of the installation’s main emission source.
2. For each of the aggregated goods category, the production processes and routes used as listed in Table 1 of Annex II.
3. For each of the goods, listed either for each CN code separately, or aggregated by aggregated goods category in accordance with Section 2 of Annex II:
(a) the specific direct embedded emissions of each of the goods;
(b) information on the data quality and methods used, in particular if the embedded emissions have been completely determined based on monitoring, or whether any of the default values made available and published by the Commission for the transitional period have been used;
(c) the specific indirect embedded emissions of each of the goods, and the method how the emission factor was determined, and the information source used;
(d) the emission factor used for electricity as imported goods, expressed as tonne CO 2 e per MWh and the data source or method used for determining the emission factor of electricity, if different than the emission factors provided by the Commission in the CBAM Transitional Registry;
(e) where default values made available and published by the Commission for the transitional period are reported instead of actual data of specific embedded emissions, a short description for the reasons shall be added;
(f) the sector-specific information in accordance with Section 2 of this Annex, if relevant;
(g) if applicable, the information on carbon price due. Where a carbon price due for precursors is obtained from other installations, any carbon price due for those precursors shall be listed separately per country of origin.
Recommended improvement of the general information
1. Total emissions of the installation, including:
(a) activity data and calculation factors for each source stream used;
(b) emissions of each emission source monitored using a measurement-based methodology;
(c) emissions determined by other methods;
(d) quantities of CO 2 received from other installations or exported to other installations, for the purpose of geological storage or as input to products in which the CO 2 is permanently chemically bound.
2. A balance of imported, produced, consumed, and exported measurable heat, waste gases and electricity.
3. The quantity of all precursors received from other installations, and their specific direct and indirect embedded emissions.
4. The quantity of precursor used in each production process, excluding precursors produced in the same installation.
5. Information on how the attributed direct and indirect emissions of each production process were calculated.
6. The activity level and attributed emissions of each production process.
7. A list of all relevant goods produced by CN code, including precursors not covered by separate production processes.
8. A short description of the installation, its main production processes, any production processes not covered for CBAM purposes, main elements of the monitoring methodology used, whether rules of an eligible monitoring, reporting and verification system have been applied, and which measures for improvement of the data quality have been taken, in particular whether any form of verification was applied.
9. Information on the electricity emissions factor in the power purchase agreement, where appropriate.
2. SECTOR-SPECIFIC PARAMETERS TO BE INCLUDED IN THE COMMUNICATION
Aggregated goods category Reporting requirement in the CBAM report Calcined clay — Whether or not the clay is calcined. Cement clinker — N.a. Cement — Mass ratio of tonnes cement clinker consumed per produced tonne of cement (clinker to cement ratio expressed in per cent). Aluminous cement — N.a. Hydrogen — N.a. Urea — Purity (mass % urea contained, % N contained). Nitric acid — Concentration (mass %). Ammonia — Concentration, if hydrous solution. Mixed fertilisers — Information required anyway under Regulation (EU) 2019/1009: — — content of N as ammonium (NH 4 + ); — content of N as nitrate (NO 3 – ); — content of N as urea; — content of N in other (organic) forms. Sintered Ore — N.a. Pig Iron — The main reducing agent used. — Mass % of Mn, Cr, Ni, total of other alloy elements. FeMn Ferro-Manganese — Mass % of Mn and carbon. FeCr – Ferro-Chromium — Mass % of Cr and carbon. FeNi – Ferro-Nickel — Mass % of Ni and carbon. DRI (Direct Reduced Iron) — The main reducing agent used. — Mass % of Mn, Cr, Ni, total of other alloy elements. Crude steel — The main reducing agent of the precursor, if known. — Mass % of Mn, Cr, Ni, total of other alloy elements. — Tonnes scrap used for producing 1 t crude steel. — % of scrap that is pre-consumer scrap. Iron or steel products — The main reducing agent used in precursor production, if known. — Mass % of Mn, Cr, Ni, total of other alloy elements. — Mass % of materials contained which are not iron or steel if their mass is more than 1 % to 5 % of the total goods’ mass. — Tonnes scrap used for producing 1 t of the product. — % of scrap that is pre-consumer scrap. Unwrought aluminium — Tonnes scrap used for producing 1 t of the product. — % of scrap that is pre-consumer scrap. — If the total content of elements other than aluminium exceeds 1 %, the total percentage of such elements. Aluminium products — Tonnes scrap used for producing 1 t of the product. — % of scrap that is pre-consumer scrap. — If the total content of elements other than aluminium exceeds 1 %, the total percentage of such elements.