Commission Implementing Regulation (EU) 2023/1773 of 17 August 2023 laying down the rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards reporting obligations for the purposes of the carbon border adjustment mechanism during the transitional period (Text with EEA relevance)
Article 3Reporting obligations of reporting declarants
In force · version of Oct 31, 2024
1. Each reporting declarant shall provide, based on the data, that the operator may communicate, as provided in Annex III to this Regulation, the following information regarding goods listed in Annex I to Regulation (EU) 2023/956 imported during the quarter to which the CBAM report relates: (a) the quantity of the goods imported, expressed in megawatt hours for electricity and in tonnes for other goods; (b) the type of goods as identified by their CN code.
2. Each reporting declarant shall provide the following information regarding the embedded emissions of the goods listed in Annex I to Regulation (EU) 2023/956, as listed in Annex I to this Regulation, in the CBAM reports: (a) the country of origin of the imported goods; (b) the installation where the goods were produced, identified by the following data: (1) the applicable United Nations Code for Trade and Transport Location (UN/LOCODE) of the location; (2) the company name of the installation, the address of the installation and its English transcript; (3) geographical coordinates of the main emission source of the installation; (c) the production routes used, defined in Section 3 of Annex II to this Regulation, which shall reflect the technology used for the production of the goods, and information on specific parameters qualifying the indicated production route chosen as defined in Section 2 of Annex IV, for determining the embedded direct emissions; (d) the specific embedded direct emissions of the goods, which shall be determined by converting the attributed direct emissions of the production processes into emissions specific of the goods expressed as CO 2 e per tonne in accordance with Sections F and G of Annex III to this Regulation; (e) the reporting requirements that have an effect on the embedded emissions of the goods as referred to in Section 2 of Annex IV to this Regulation; (f) for electricity as imported goods, the reporting declarant shall report the following information: (1) the emission factor used for electricity, expressed as tonne CO 2 e per MWh (megawatt hour) as determined in accordance with Section D of Annex III to this Regulation; (2) the data source or method used for determining the emission factor of electricity as determined in accordance with Section D of Annex III to this Regulation; (g) for steel goods, the identification number of the specific steel mill where a particular batch of raw materials was produced, where known.
3. For specific embedded indirect emissions, each reporting declarant shall report the following information, as listed in Annex I to this Regulation, in the CBAM reports: (a) electricity consumption, expressed in megawatt hours, of the production process per tonne of goods produced; (b) specify whether the declarant reports actual emissions or default values made available and published by the Commission for the transitional period in accordance with Section D of Annex III to this Regulation; (c) the corresponding emissions factor of the electricity consumed; (d) the amount of specific embedded indirect emissions, which shall be determined by converting the attributed embedded indirect emissions of the production processes into indirect emissions specific of the goods expressed as CO 2 e per tonne in accordance with Sections F and G of Annex III to this Regulation.
4. Where the rules for determining data are different from the ones indicated in Annex III to this Regulation, the reporting declarant shall provide additional information and description on the methodological basis of the rules used to determine the embedded emissions. The rules described shall lead to similar coverage and accuracy of emissions data, including systems boundaries, production processes monitored, emission factors and other methods employed for the calculations and reporting.
5. For the purposes of reporting, the reporting declarant may request that the operator uses an electronic template provided by the Commission and provide the content of the communication in Sections 1 and 2 of Annex IV.