Commission Implementing Regulation (EU) 2026/2027 of 10 September 2026 concerning the authorisation of molybdenum chelate of EDTA as a feed additive for honeybees (holder of authorisation: Oligofeed SAS)
Preamble 1
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition ( 1 ) , and in particular Article 9(2) thereof,
Whereas:
HAS ADOPTED THIS REGULATION:
recital 1recital 1
(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such an authorisation.
recital 2recital 2
(2) In accordance with Article 7 of Regulation (EC) No 1831/2003, an application was submitted for the authorisation of molybdenum chelate of EDTA. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
recital 3recital 3
(3) The application concerns the authorisation of molybdenum chelate of EDTA as a feed additive for honeybees and bumblebees, requesting that additive to be classified in the category ‘nutritional additives’, in the functional group ‘compounds of trace elements’.
recital 4recital 4
(4) The European Food Safety Authority (‘the Authority’) concluded in its opinion of 27 January 2026 ( 2 ) that molybdenum chelate of EDTA is safe for the target species, as well as for consumers and the environment, when used at the maximum recommended use level of 8 mg/hive per feeding. The Authority also concluded that molybdenum chelate of EDTA should be considered a skin and respiratory sensitiser, that inhalation and dermal exposure are considered a risk and should be minimised, while the additive is not irritant to skin nor to eyes. It could not conclude on the efficacy of molybdenum chelate of EDTA as a nutritional additive in honeybees and bumblebees but concluded that the supplementation of the additive at 8 mg/hive has the potential to be efficacious as a zootechnical additive for honeybees. However, no conclusion could be reached on the efficacy of molybdenum chelate of EDTA when supplemented to bumblebees. It did not consider that there is a need for specific requirements of post-market monitoring. The Authority also verified the report on the methods of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
recital 5recital 5
(5) On 2 March 2026, the applicant withdrew the application for the authorisation of molybdenum chelate of EDTA for bumblebees, and on 12 May 2026 it requested molybdenum chelate of EDTA to be reclassified in the category ‘zootechnical additives’ and in the functional group ‘physiological condition stabilisers’.
recital 6recital 6
(6) In view of the above, the Commission considers that molybdenum chelate of EDTA satisfies the conditions provided for in Article 5 of Regulation (EC) No 1831/2003. Accordingly, the use of that substance should be authorised for honeybees. Considering that molybdenum chelate of EDTA is to be fed to honeybees via sugar-based feed, it is appropriate to prohibit the use of the additive when the honey supers are on, and in the 2-month period preceding the honey collection, to avoid honey adulteration. In addition, the Commission considers that appropriate protective measures should be taken to prevent adverse effects on the health of the users of the additive.
recital 7recital 7
(7) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
Article 1Authorisation
The substance specified in the Annex, belonging to the additive category ‘zootechnical additives’ and to the functional group ‘physiological condition stabilisers’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 2Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Annex 1ANNEX
Identification number of the additive Name of the holder of authorisation Name of the additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg additive/kg sugar-based feed with a moisture content of 30 % Category: zootechnical additives. Functional group: physiological condition stabilisers (improvement of winter survival rate) 4e2 Oligofeed SAS Molybdenum chelate of EDTA Additive composition Molybdenum in form of a chelate of EDTA ( 1 ) having a molybdenum content of 27–31 %. Solid form. Characterisation of the active substance Chelate of molybdenum in the form of [Mo 2 O 4 ] 2+ and an organic ligand EDTA 4 – in a form of sodium salt. Na 2 [Mo 2 O 4 (EDTA)](H 2 O) x (NaCl) y , with x = 0–5 and y = 0–0,5. CAS number 3075057-08-5 Analytical methods ( 2 ) For the determination of total molybdenum in the feed additive: inductively coupled plasma-atomic emission spectrometry (ICP-AES) – EN 15510 For the determination of total sodium in the feed additive: — Inductively coupled plasma-atomic emission spectrometry (ICP-AES) – EN 15510 or — Inductively coupled plasma-atomic emission spectrometry (ICP-AES) – EN 15621 or — Atomic absorption spectrometry (AAS) – ISO 6869 For the determination of total molybdenum in compound feed: inductively coupled plasma-mass spectrometry (ICP-MS) – EN 17053 For the qualitative proving of the chelate structure between molybdate and EDTA in the feed additive: Fourier transformed infrared spectroscopy (FTIR) Honeybees — 2,9 ( 3 ) 2,9 ( 3 ) 1. In the directions for use of the additive and premixture, the storage conditions and stability to heat treatment shall be indicated. 2. The additive shall be fed to honeybees via a sugar-based feed at the minimum and maximum dose of 8 mg additive per hive per feeding. 3. Indicate in the directions for use of the additive, premixtures and sugar-based feed: ‘The additive shall not be used when the honey supers are on, nor in the 2-month period preceding the honey collection.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal respiratory and skin protective equipment. 1 October 2036 ( 1 ) Ethylenediaminetetraacetic acid. ( 2 ) Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en. ( 3 ) Corresponding to the feeding of a hive with 2 litres sugar syrup containing 4 mg additive/litre (1 litre sugar syrup with a moisture content of 30 % = 1,4 kg).