1. The forms to be used by the competent authorities of the Member States for issuing the import authorisations referred to in Article 21 shall conform to the model of the import licence set out in Annex III.

2. Import licence forms and extracts thereof shall be drawn up in duplicate, one copy, marked ‘Holder’s copy’ and bearing the number 1 to be issued to the applicant, and the other, marked ‘Copy for the issuing authority’ and bearing the number 2, to be kept by the authority issuing the licence. For administrative purposes the competent authorities may add additional copies to form 2.

3. Forms shall be printed on white paper free of mechanical pulp, dressed for writing and weighing between 55 and 65 g/m 2 . Their size shall be 210 × 297 mm; the type space between the lines shall be 4,24 mm (one sixth of an inch); the layout of the forms shall be followed precisely. Both sides of copy No 1, which is the licence itself, shall in addition have a red printed guilloche-pattern background so as to reveal any falsification by mechanical or chemical means.

4. Member States shall be responsible for having the forms printed. The forms may also be printed by printers appointed by the Member State in which they are established. In the latter case, reference to the appointment by the Member State must appear on each form. Each form shall bear the printer’s name and address or a mark enabling the printer to be identified.

5. At the time of their issue the import licences or extracts shall be given an issue number determined by the competent authorities of the Member State. The import licence number shall be notified to the Commission electronically within the integrated network set up under Article 4.

6. Licences and extracts shall be completed in the official language, or one of the official languages, of the Member State of issue.

7. In box 10 the competent authorities shall indicate the appropriate steel product group.

8. The marks of the issuing agencies and debiting authorities shall be applied by means of a stamp. However, an embossing press combined with letters or figures obtained by means of perforation, or printing on the licence may be substituted for the issuing authority’s stamp. The issuing authorities shall use any tamper-proof method to record the quantity allocated in such a way as to make it impossible to insert figures or references.

9. The reverse of copy No 1 and copy No 2 shall bear a box in which quantities may be entered, either by the customs authorities when import formalities are completed, or by the competent administrative authorities when an extract is issued. If the space set aside for debits on a licence or extract thereof is insufficient, the competent authorities may attach one or more extension pages bearing boxes matching those on the reverse of copy No 1 and copy No 2 of the licence or extract. The debiting authorities shall place their stamp so that one half is on the licence or extract thereof and the other half is on the extension page. If there is more than one extension page, a further stamp shall be placed in like manner across each page and the preceding page.

10. Import licences and extracts issued, and entries and endorsements made, by the authorities of one Member State shall have the same legal effect in each of the other Member States as documents issued, and entries and endorsements made, by the authorities of such Member States.

11. The competent authorities of the Member States concerned may, where indispensable, require the contents of licences or extracts to be translated into the official language or one of the official languages of that Member State.

CHAPTER III

ADMINISTRATIVE COOPERATION

COUNCIL REGULATION (EC) No 1899/2005 of 27 June 2005 on administering certain restrictions on imports of certain steel products from the Russian Federation ANNEX I ANNEX II ANNEX III ANNEX IV ANNEX V