Commission Directive 2009/1/EC of 7 January 2009 amending, for the purposes of its adaptation to technical progress, Directive 2005/64/EC of the European Parliament and of the Council on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability (Text with EEA relevance)
Article 1
In force · version of Feb 3, 2009
Annex IV to Directive 2005/64/EC is amended by inserting a new paragraph 4 as follows:
‘4.1. For the purposes of preliminary assessment under Article 6 of Directive 2005/64/EC, the vehicle manufacturer shall be required to demonstrate that, through contractual arrangements with his suppliers, compliance with Article 4(2)(a) of Directive 2000/53/EC is ensured.
4.2. For the purposes of preliminary assessment under Article 6 of Directive 2005/64/EC, the vehicle manufacturer shall be required to establish procedures for the following purposes: (a) to communicate the applicable requirements to his staff and to all of his suppliers; (b) to monitor and ensure that suppliers act in accordance with those requirements; (c) to collect the relevant data through the full supply chain; (d) to check and verify the information received from suppliers; (e) to react adequately where the data received from the suppliers indicate non-compliance with the requirements under Article 4(2)(a) of Directive 2000/53/EC.
4.3. For the purposes of paragraph 4.1 and 4.2, the vehicle manufacturer shall be required to use, in agreement with the competent body, ISO 9000/14000 or other standardised quality assurance programme.’