Commission Implementing Regulation (EU) 2025/1706 of 25 July 2025 laying down rules, procedures and testing methodologies for the application of Regulation (EU) 2024/1257 as regards exhaust and evaporative emission type-approval of vehicles of categories M1 and N1 and amending Implementing Regulation (EU) 2020/683
Article 13Administrative provisions for emission type-approval of replacement pollution control device as a separate technical unit
In force · version of Jul 23, 2026
1.If the requirements laid down in Annex XIII to this Regulation are met, the type-approval authority shall grant an emission type-approval for replacement pollution control devices as separate technical unit and issue an emission type-approval number in accordance with the numbering system set out in Annex IV to Regulation (EU) 2020/683.
The approval authority shall not assign the same number to another replacement pollution control device type.
The same type-approval number may cover the use of that replacement pollution control device type on a number of different vehicle types.
2.For the purposes of paragraph 1, the approval authority shall issue an emission type-approval certificate established in accordance with the model set out in Appendix 2 to Annex XIII.
3.If the applicant for emission type-approval is able to demonstrate to the approval authority or technical service that the replacement pollution control device is of a type indicated in Section 2.3 of the Addendum to Annex A2 of UN Regulation No 154, the granting of a type-approval shall not depend on verification of compliance with the requirements specified in Section 4 of Annex XIII to this Regulation.