Commission Directive 2007/19/EC of 30 March 2007 amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with food and Council Directive 85/572/EEC laying down the list of simulants to be used for testing migration of constituents of plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance )
Articolo 4e
In vigore · versione del 20 apr 2007
The use of azodicarbonamide, Ref. No 36640 (CAS No 000123-77-3) in the manufacture of plastic materials and articles is prohibited.’
6.In Article 5a paragraph 2 is replaced by the following:
‘2. At the marketing stages other than the retail stages, plastic materials and articles which are intended to be placed in contact with foodstuffs and which contain additives referred to in paragraph 1 shall be accompanied by a written declaration containing the information referred to in Article 9.’
7.In Article 7 the following paragraph is added:
‘For plastic materials and articles intended to be brought into contact with or already in contact with food for infants and young children, as defined by Directives 91/321/EEC and 96/5/EC, the SMLs shall always be applied as mg/kg.’
8.The following Article 7a is inserted:
‘Article 7a
1.In a plastic multi-layer material or article, the composition of each plastic layer shall comply with this Directive.
2.By way of derogation from paragraph 1, a layer which is not in direct contact with food and is separated from the food by a plastic functional barrier, may, provided that the finished material or article complies with the specific and overall migration limits specified in this Directive:
(a) not comply with the restrictions and specifications set in this Directive,
(b) be manufactured with substances other than those included in this Directive or in the national lists concerning the plastic materials and articles intended to come into contact with food.
3.The migration of the substances referred to in paragraph 2(b) into food or simulant shall not exceed 0,01 mg/kg, measured with statistical certainty by a method of analysis in accordance with Article 11 of Regulation (EC) No 882/2004 of the European Parliament and of the Council ( 16 ). This limit shall always be expressed as concentration in foods or simulants. It shall apply to a group of compounds, if they are structurally and toxicologically related, in particular isomers or compounds with the same relevant functional group, and shall include possible set-off transfer.
4.The substances referred to in paragraph 2(b) shall not belong to either of the following categories:
(a) substances classified as proved or suspect “carcinogenic”, “mutagenic” or “toxic to reproduction” substances in Annex I to Council Directive 67/548/EEC ( 17 );
(b) substances classified under the self-responsibility criteria as ‘carcinogenic’, ‘mutagenic’ or ‘toxic to reproduction’ according to the rules of Annex VI to Directive 67/548/EEC.
9.In Article 8 the following paragraph 5 is added:
‘5. Notwithstanding paragraph 1, for phthalates (Ref. No 74640, 74880, 74560, 75100, 75105) referred to in Annex III Section B, the verification of the SML shall only be performed in food simulants. However, verification of the SML may be performed in food where the food has not already been in contact with the material or article and is pre-tested for the phthalate and the level is not statistically significant or greater than or equal to the limit of quantification.’
10.Article 9 is replaced by the following:
‘Article 9
1.At the marketing stages other than the retail stage, plastic materials and articles as well as the substances intended for the manufacturing of those materials and articles, shall be accompanied by a written declaration in accordance with Article 16 of Regulation (EC) No 1935/2004.
2.The declaration referred to in paragraph 1 shall be issued by the business operator and shall contain the information laid down in Annex VIa.
3.Appropriate documentation to demonstrate that the materials and articles as well as the substances intended for the manufacturing of those materials and articles comply with the requirements of this Directive shall be made available by the business operator to the national competent authorities on request. That documentation shall contain the conditions and results of testing, calculations, other analysis, and evidence on the safety or reasoning demonstrating compliance.’
11.Annexes I, II and III are amended in accordance with Annexes I, II and III to this Directive.
12.The text in Annex IV to this Directive is inserted as Annex IVa.
13.Annexes V and VI are amended in accordance with Annexes V and VI to this Directive.
14.The text in Annex VII to this Directive is inserted as Annex VIa.